Electric Starting Motor
Show/hide table
Illustration 1 | g01093502 |
Show/hide table
Illustration 2 | g01093288 |
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise
No load conditions at
- Speed ... 6900 ± 1800 rpm
- Current draw ... 150.5 ± 27.5 amp
- Voltage ... 11 V
- Current draw ... 150.5 ± 27.5 amp
(1) Battery terminal nut
- Torque ...
30.5 ± 3.5 N·m (22 ± 3 lb ft)
A maximum of three cable or wire terminals should be between the nuts.
(2) Ground terminal nut
- Torque ...
30.5 ± 3.5 N·m (22 ± 3 lb ft)
(3) Ground terminal nut
- Torque ...
2.25 ± 0.25 N·m (20 ± 2 lb in)
(4) Switch terminal nut
- Torque ...
2.25 ± 0.25 N·m (20 ± 2 lb in)
(5) Motor terminal nut
- Torque ...
30.5 ± 3.5 N·m (22 ± 3 lb ft)
(6) Nut for the motor frame
- Torque ...
8 ± 3 N·m (70 ± 24 lb in)
Clearance between the pinion and the housing ...
Current draw at 10 V and
- Pull-in windings ... 97 Amp
- Hold-in windings ... 18 Amp maximum
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
Installation of the Uninterruptible Power Supply (Single-Module System){4480} Installation of the Uninterruptible Power Supply (Single-Module System){4480}
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
C9 Marine Engines and C9 Marine Generator Sets Alternator and Regulator
2004/08/01 An Improved Injection Actuation Pressure Sensor Is Now Used {1925}
EMCP3 Spare Analog Input Programming
EMCP3 Digital Input Programming
EMCP3 Component Location
3500 Engines for Caterpillar Built Generator Sets Prelube Pressure Switch
2004/08/01 An Improved Injection Actuation Pressure Sensor Is Now Used {1925}
2004/08/01 Maintenance Considerations for Engines in Landfill Applications {1000}
G3612 and G3616 Engines Product Description
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Bypass Valve (Transmission Oil Filter)
C18 Marine Generator Set Battery - Replace
3516C Locomotive Engine Safety Messages
C9 Marine Generator Set Engines Charging System - Test
Some Original Part Numbers Have Been Discontinued{1000, 7000, 7567} Some Original Part Numbers Have Been Discontinued{1000, 7000, 7567}
C9 Marine Engines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C9 Marine Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
C3.3 Industrial Engine Before Starting Engine
XQ60 Rental Generator Set Engine Stopping
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Safety Signs and Labels