CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects signal voltage that is above normal.
System Response:
The ECM will log the diagnostic code. The ECM flags engine oil temperature as invalid data and a default value of 30 °C (86 °F) is used.
- None
Test Step 1. Perform the following diagnostic procedure: Engine Temperature Sensor Open or Short Circuit - Test
Results:
- OK - STOP
Caterpillar Information System:
Some Original Part Numbers Have Been Discontinued{1000, 7000, 7567} Some Original Part Numbers Have Been Discontinued{1000, 7000, 7567}
C9 Marine Generator Set Engines Charging System - Test
3516C Locomotive Engine Safety Messages
C18 Marine Generator Set Battery - Replace
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Bypass Valve (Transmission Oil Filter)
G3612 and G3616 Engines Product Description
2004/08/01 Maintenance Considerations for Engines in Landfill Applications {1000}
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor
Installation of the Uninterruptible Power Supply (Single-Module System){4480} Installation of the Uninterruptible Power Supply (Single-Module System){4480}
C9 Marine Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
C3.3 Industrial Engine Before Starting Engine
XQ60 Rental Generator Set Engine Stopping
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Safety Signs and Labels
G3612 and G3616 Engines Plate Locations and Film Locations
2004/08/01 Use the Correct Front Housing Bolts {1151}
2004/08/16 Use the Correct Front Housing Bolts {1151}
G3612 and G3616 Engines Reference Material
G3500B Engines Engine Control Panel - Optional
G3612 and G3616 Engines Cooling System Coolant (NGEC) - Change
2004/11/15 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}