Ejector Support Roller - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
B     | 1P-0774     | Seal Guide     | 1     |
C     | 3J-9511     | Sleeve Bearing     | 1     |
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Pack the roller bearing with 5P-0960 Molybdenum Grease before installation. Install roller bearing (5) to roller shaft (4) .
Show/hide table
Illustration 1 | g00443026 |
- Use Tool (A) , Tool (B) , Tool (C) and a hydraulic press to install the plug and the roller shaft (5) to roller (2) . Install the roller shaft until the roller shaft is seated in the roller.
Show/hide table
Illustration 2 | g00444069 |
- Install retaining ring (3) to roller (2) .
Show/hide table
Illustration 3 | g00443024 |
- Install key (1) to roller assembly (2) .
Show/hide table
Illustration 4 | g00443023 |
End By: Install the ejector support roller. Refer to Disassembly and Assembly, "Support Roller (Ejector) - Install". The information is in this manual.
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Disassemble
994D Wheel Loader Automatic Lubrication Grease Tank - Fill
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Install
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Remove
D8R Track-Type Tractor Stopping the Engine
994D Wheel Loader Articulation Bearings - Lubricate
D8R Track-Type Tractor Service Brake Control
994D Wheel Loader Steering System Pressure Switch (Steering and Brake Filter)
966G and 972G Wheel Loaders Power Train Modulating Valve (Transmission Clutch) - Install
966G and 972G Wheel Loaders Power Train Modulating Valve (Transmission Clutch) - Remove
994D Wheel Loader Alternator - Inspect
631E Series II Wheel Tractor-Scrapers Hydraulic Tank Breaker Relief Valve - Clean
627F Wheel Tractor-Scraper Rollover Protective Structure (ROPS) - Inspect
631E Series II Wheel Tractor-Scrapers Router Bits - Inspect/Replace
D8R Track-Type Tractor Tracks
928G Wheel Loader Tire Shipping Pressure
928G Wheel Loader Sampling Interval and Location of Sampling Valve
623F Wheel Tractor-Scraper Hydraulic System Piston Pump (Elevator)
994D Wheel Loader Axle Oscillation Bearings - Lubricate
D8R Track-Type Tractor Walk-Around Inspection
623F Wheel Tractor-Scraper Hydraulic System Pressure and Flow Compensator Valve
928G Wheel Loader Lubricant Viscosities
631E Series II Wheel Tractor-Scrapers Seat Suspension - Lubricate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Electronic Control - Remove and Install