Ejector Support Roller - Remove
Removal Procedure
- Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
- Move the ejector to the front of the scraper bowl.
- Attach a nylon lifting strap and a hoist to the ejector.
- Remove three bolts (1) and plate (2) from ejector (3) .
Show/hide table
Illustration 1 | g00442083 |
- Place the cribbing under the ejector cylinder, as shown.
Show/hide table
Illustration 2 | g00442085 |
- Use a hammer and a brass rod to remove pin (4) from ejector (3) .
Show/hide table
Illustration 3 | g00442084 |
- Use a hoist to move the ejector forward in order to remove the ejector support roller from the track assembly.
Show/hide table
Illustration 4 | g00445443 |
- Place the cribbing under the ejector, as shown.
Show/hide table
Illustration 5 | g00442086 |
- Remove nut (5) from roller (6) .
Show/hide table
Illustration 6 | g00442088 |
- Use a soft faced hammer to remove roller (6) from ejector (3) .
Show/hide table
Illustration 7 | g00442183 |
Caterpillar Information System:
D8R Track-Type Tractor Stopping the Engine
994D Wheel Loader Articulation Bearings - Lubricate
D8R Track-Type Tractor Service Brake Control
994D Wheel Loader Steering System Pressure Switch (Steering and Brake Filter)
966G and 972G Wheel Loaders Power Train Modulating Valve (Transmission Clutch) - Install
966G and 972G Wheel Loaders Power Train Modulating Valve (Transmission Clutch) - Remove
994D Wheel Loader Alternator - Inspect
631E Series II Wheel Tractor-Scrapers Hydraulic Tank Breaker Relief Valve - Clean
994D Wheel Loader Power Train Torque Converter Lockup Clutch Pressure - Test
D8R Track-Type Tractor Horn
966G and 972G Wheel Loaders Power Train Relief Valve (Transmission Hydraulic Control) - Install
615C Series II Wheel Tractor-Scraper Machine Systems Diverter Valve (Elevator) - Assemble
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Install
994D Wheel Loader Automatic Lubrication Grease Tank - Fill
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Ejector Support Roller - Assemble
627F Wheel Tractor-Scraper Rollover Protective Structure (ROPS) - Inspect
631E Series II Wheel Tractor-Scrapers Router Bits - Inspect/Replace
D8R Track-Type Tractor Tracks
928G Wheel Loader Tire Shipping Pressure
928G Wheel Loader Sampling Interval and Location of Sampling Valve
623F Wheel Tractor-Scraper Hydraulic System Piston Pump (Elevator)
994D Wheel Loader Axle Oscillation Bearings - Lubricate
D8R Track-Type Tractor Walk-Around Inspection