Tire and Rim - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-9694     | Ratchet Hoist     | 1     |
- Install tire (3) to the machine. The tire weighs 421 kg (928 lb). Install the two nuts to the rim. Remove Tool (A) and the lift truck from tire (3) .
Show/hide table
Illustration 1 | g00425080 |
- Install 14 nuts (1) to rim (2) . Torque the nuts to 140 ± 20 N·m (105 ± 15 lb ft). Tighten the nuts again to a torque of 500 ± 35 N·m (370 ± 25 lb ft). Lower the machine to the ground and remove the tooling.
Show/hide table
Illustration 2 | g00421222 |
- Check the tire inflation. Refer to Owner's Manual, SEBU6447, "Tire Inflation Information". The information is in this manual.
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Machine Systems Tire and Rim - Remove
623E Wheel Tractor-Scraper Hydraulic System Check Valve (Floor)
D6R Track-Type Tractor Power Train Torque Divider
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Pump Drive - Adjust
992G Wheel Loader and 854G Wheel Dozer Power Train Solenoid Valve (Transmission Clutch) - Test
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Pressure Switch (Pilot) for the Hydraulic System - Check - Submode 25
633E Series II Wheel Tractor-Scraper Hydraulic System Check Valve (Carry)
623F Wheel Tractor-Scraper Hydraulic System Bowl Circuit
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Software Part Number Display - Submode 13
D6R Track-Type Tractor Power Train Transmission Mounting
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Pressures - Test and Adjust
994D Wheel Loader Power Train Filter Bypass Switch (Power Train)
627F Wheel Tractor-Scraper Wheel Scraper Power Train Power Train
621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Testing and Adjusting
994D Wheel Loader Power Train Final Drive, Brake, and Wheel
627F Wheel Tractor-Scraper Engine Oil and Filter - Change
613C Series II Wheel Tractor-Scraper Machine Systems Brake Caliper - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Brake Caliper - Assemble
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Remove
631E Series II Wheel Tractor-Scrapers Fuel Tank Cap and Strainer - Clean
D6R Track-Type Tractor Power Train Transmission and Torque Converter Pump
994D Wheel Loader Power Train Fixed Axle (Front)
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Disassemble