Tire and Rim - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 9U-7536     | Lift Stand     | 1     |
B     | 8S-7640     | Stand     | 2     |
8S-7621 | Tube     | 2     | |
4C-6562 | Pin Assembly     | 2     | |
C     | 5P-9694     | Ratchet Hoist     | 1     |
- Park the machine on a hard, level surface. Lower the scraper bowl and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
- Install Tool (A) under the frame, as shown.
Show/hide table
Illustration 1 | g00421220 |
- Use Tool (A) to raise the rear of the scraper. Install Tooling (B) under the frame in order to support the scraper.
Show/hide table
Illustration 2 | g00421221 |
- Remove 14 nuts (1) from rim (2) . Leave two nuts on the rim in order to hold the tire.
Show/hide table
Illustration 3 | g00421222 |
- Attach Tool (C) and a lift truck to tire (3) . Remove the two nuts from the rim. Remove tire (3) from the machine. The tire weighs 421 kg (928 lb) .
Show/hide table
Illustration 4 | g00421223 |
Caterpillar Information System:
623E Wheel Tractor-Scraper Hydraulic System Check Valve (Floor)
D6R Track-Type Tractor Power Train Torque Divider
992G Wheel Loader and 854G Wheel Dozer Power Train Torque Converter Pump Drive - Adjust
992G Wheel Loader and 854G Wheel Dozer Power Train Solenoid Valve (Transmission Clutch) - Test
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Pressure Switch (Pilot) for the Hydraulic System - Check - Submode 25
633E Series II Wheel Tractor-Scraper Hydraulic System Check Valve (Carry)
623F Wheel Tractor-Scraper Hydraulic System Bowl Circuit
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Software Part Number Display - Submode 13
D6R Track-Type Tractor Power Train Transmission Mounting
992G Wheel Loader and 854G Wheel Dozer Power Train Transmission Pressures - Test and Adjust
994D Wheel Loader Power Train Filter Bypass Switch (Power Train)
992G Wheel Loader and 854G Wheel Dozer Power Train Reduced Rimpull Pressure - Test
613C Series II Wheel Tractor-Scraper Machine Systems Tire and Rim - Install
627F Wheel Tractor-Scraper Wheel Scraper Power Train Power Train
621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Testing and Adjusting
994D Wheel Loader Power Train Final Drive, Brake, and Wheel
627F Wheel Tractor-Scraper Engine Oil and Filter - Change
613C Series II Wheel Tractor-Scraper Machine Systems Brake Caliper - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Brake Caliper - Assemble
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Remove
631E Series II Wheel Tractor-Scrapers Fuel Tank Cap and Strainer - Clean
D6R Track-Type Tractor Power Train Transmission and Torque Converter Pump
994D Wheel Loader Power Train Fixed Axle (Front)
966G Wheel Loader and 972G Wheel Loader Machine Systems Pilot Operated Hydraulic Control - Install