Fire Extinguisher Location
Make sure that a fire extinguisher is on the machine. Make sure that you are familiar with the operation of the fire extinguisher. Inspect the fire extinguisher and service the fire extinguisher. Obey the recommendations on the instruction plate.
Show/hide table
| |
| Illustration 1 | g01033455 |
Mount the fire extinguisher to the rear fender on the left side of the machine under the steps. This is the recommended location. Do not weld the ROPS in order to install the fire extinguisher. Also, do not drill holes in the ROPS in order to mount the fire extinguisher on the ROPS.
Caterpillar Information System:
854G Wheel Dozer Machine Systems Main Control Valve - Install
854G Wheel Dozer Machine Systems Main Control Valve - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Air/Hydraulic Cylinder (Brake) - Disassemble
854G Wheel Dozer Machine Systems Quick-Drop Valve - Assemble
637E Series II Wheel Tractor-Scrapers Fan Drive Bearing and Belt Tightener - Lubricate
854G Wheel Dozer Machine Systems Quick-Drop Valve - Disassemble
3176C and 3196 Industrial Engines Atmospheric Pressure Sensor
613C Series II Wheel Tractor-Scraper Machine Systems Quick-Release Valve (Brake) - Remove and Install
854G Wheel Dozer Machine Systems Quick-Drop Valve - Install
902 and 906 Compact Wheel Loaders Power Train System Piston Motor (Hydrostatic)
854G Wheel Dozer Machine Systems Quick-Drop Valve - Remove
854G Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Assemble
994D Wheel Loader Power Train Filter (Power Train)
854G Wheel Dozer Machine Systems Lift Cylinder Mounting - Remove and Install
992G Wheel Loader and 854G Wheel Dozer Steering System Limit Switch (STIC Lockout Control) - Adjust
990 Wheel Loader, 990 Series II Wheel Loader and 844 Wheel Dozer Power Train Wheel Bearings - Adjust
994D Wheel Loader Power Train Pressure Sensor (Impeller Clutch Oil)
966G Wheel Loader and 972G Wheel Loader Machine Systems Diverter Valve (Ride Control) - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train Wheel Bearings - Adjust
Field Installation of the Hystat Joystick Effort and Modulation Springs{5059} Field Installation of the Hystat Joystick Effort and Modulation Springs{5059}
631E Series II Wheel Tractor-Scrapers Cooling System Coolant (DEAC) - Change
613C Series II Wheel Tractor-Scraper Machine Systems Air/Hydraulic Cylinder (Brake) - Assemble
994D Wheel Loader Power Train Transmission Planetary
902 and 906 Compact Wheel Loaders Braking System Master Cylinder