Quick-Drop Valve - Assemble
Note: Thoroughly clean all parts of the quick-drop valve prior to assembly. Inspect all parts of the quick-drop valve. If any parts of the quick-drop valve are damaged, use new parts for replacement. Lubricate all mating parts and the O-ring seals with clean hydraulic oil.
- Carefully install spring (7) and plunger (6) in valve body (5).
- Install O-ring seals (11) and (12) in manifold (10).
- Install manifold (10) on valve body (5). Install bolts (8) and (9). The torque for the bolts is
105 ± 20 N·m (75 ± 15 lb ft) . - Carefully install spool (4) in valve body (5).
- Install O-ring seal (1) in cover (3).
- Install cover (3) and bolts (2) on valve body (5). The torque for the bolts is
105 ± 20 N·m (75 ± 15 lb ft) .
Show/hide table
Illustration 1 | g00401379 |
End By:
- Install the quick-drop valve. Refer to Disassembly and Assembly, "Quick-Drop Valve - Install".
Caterpillar Information System:
637E Series II Wheel Tractor-Scrapers Fan Drive Bearing and Belt Tightener - Lubricate
854G Wheel Dozer Machine Systems Quick-Drop Valve - Disassemble
3176C and 3196 Industrial Engines Atmospheric Pressure Sensor
613C Series II Wheel Tractor-Scraper Machine Systems Quick-Release Valve (Brake) - Remove and Install
854G Wheel Dozer Machine Systems Quick-Drop Valve - Install
902 and 906 Compact Wheel Loaders Power Train System Piston Motor (Hydrostatic)
854G Wheel Dozer Machine Systems Quick-Drop Valve - Remove
854G Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Assemble
854G Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Disassemble
631E Series II Wheel Tractor-Scrapers Differential and Final Drive Oil Level - Check
854G Wheel Dozer Machine Systems Tilt Control Valve (Dual) - Install
613C Series II Wheel Tractor-Scraper Machine Systems Check Valve (Floor) - Install
613C Series II Wheel Tractor-Scraper Machine Systems Air/Hydraulic Cylinder (Brake) - Disassemble
854G Wheel Dozer Machine Systems Main Control Valve - Remove
854G Wheel Dozer Machine Systems Main Control Valve - Install
IT14G Integrated Toolcarrier Fire Extinguisher Location
994D Wheel Loader Power Train Filter (Power Train)
854G Wheel Dozer Machine Systems Lift Cylinder Mounting - Remove and Install
992G Wheel Loader and 854G Wheel Dozer Steering System Limit Switch (STIC Lockout Control) - Adjust
990 Wheel Loader, 990 Series II Wheel Loader and 844 Wheel Dozer Power Train Wheel Bearings - Adjust
994D Wheel Loader Power Train Pressure Sensor (Impeller Clutch Oil)
966G Wheel Loader and 972G Wheel Loader Machine Systems Diverter Valve (Ride Control) - Remove
992G Wheel Loader and 854G Wheel Dozer Power Train Wheel Bearings - Adjust
Field Installation of the Hystat Joystick Effort and Modulation Springs{5059} Field Installation of the Hystat Joystick Effort and Modulation Springs{5059}