IT14G Integrated Toolcarrier Caterpillar


Starting Above 0°C (32°F)

Usage:

IT14G 1WN

  • Engage the parking brake.

    1. Move the direction control lever or move the direction control switch (if equipped) into NEUTRAL.

    1. Move the control levers to the HOLD position.



      Illustration 1g00412042

    1. Turn the engine start switch to the ON position (1). Pause for three seconds for the secondary steering self-test (if equipped).

    1. Turn the engine start switch key to the START position (2) in order to start the engine. Release the key when the engine starts.


    NOTICE

    Do not crank the engine for more than 30 seconds. Allow the starter to cool for two minutes before cranking again.

    Turbocharger (if equipped) damage can result, if the engine is not kept low until the engine oil light/gauge verifies the oil pressure is sufficient.


  • Caterpillar Information System:

    IT14G Integrated Toolcarrier Walk-Around Inspection
    IT14G Integrated Toolcarrier Bucket Kickout and Positioner Control
    3406E and 3456 Engines for Caterpillar Built Machines Compression Brake
    IT14G Integrated Toolcarrier Hydraulic Lockout Control
    914G Wheel Loader Multipurpose Control
    854G Wheel Tractor and 992G Wheel Loader Engine Supplement Engine to Torque Converter - Connect
    631E Series II, 633E Series II and 637E Series II Wheel Tractor-Scrapers Air System and Brakes Check Valve (Air Tank)
    854G Wheel Tractor and 992G Wheel Loader Engine Supplement Engine from Torque Converter - Separate
    914G Wheel Loader Single Lever Control
    627F Wheel Tractor-Scraper Wheel Scraper Power Train Pressure Control Valve
    IT14G Integrated Toolcarrier Ride Control - If Equipped
    IT14G Integrated Toolcarrier Steering Column Tilt Control
    621F and 627F Wheel Tractor-Scrapers Hydraulic System Bowl Cylinder
    Caterpillar Monitoring System Tattletale Mode
    994D Wheel Loader Steering System Steering Control Valve
    621F and 627F Wheel Tractor-Scrapers Hydraulic System Apron Cylinder
    637E Wheel Tractor-Scraper Wheel Scraper Power Train Relief Valve (Transmission Lubrication) - Scraper
    3054 Engine Rocker Shaft
    621F, 623F and 627F Wheel Tractor-Scrapers Air System and Brakes Service Brake Control Valve
    994D Wheel Loader Automatic Lubrication System General Information
    627F Wheel Tractor-Scraper Wheel Scraper Power Train Final Drive and Wheel
    994 Wheel Loader Power Train Transmission Lubrication
    994D Wheel Loader Steering System Filter (Steering Pump Case Drain)
    Caterpillar Monitoring System Units Mode
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.