6V7013 Rivet Roll Set Now Available {0613,0622,3012}
Usage:
7155 Semiautomatic Transmissions
The 6V7013 Rivet Roll Set is now available to install the 9N4116 Pistons on the 9N4115 Valves-the poppet valves-in Caterpillar 7155 Semiautomatic Transmissions. The set permits more accuracy during assembly of the piston and poppet than the automatic center punch formerly used.
The Service Manual for the 7155 Semiautomatic Transmission has instructions for the 6V7013 Rivet Roll Set.
This new tool also can be used for clinching 5/32" (3.97 mm - .156") diameter rivets in other service applications.
Caterpillar Information System:
1982/11/29 New Flexible Coupling Group Must Be Installed Correctly {3300,3252}
1982/11/29 Removal Of Water Pump Impeller {1361}
1982/11/29 New 6V6146 Load Leveler Can Lift Larger Components {0644}
1982/11/29 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29 Hose Presses Can Now Be Used To Service 12.7 mm (.50") JIC Couplings {0623,0624,7554}
1982/11/29 Transmission Pump Failure Can Be Caused By Worn Splines Or Slot In Pump Drive {3153}
1982/11/29 Inspection Of Equipment After It Has Been In Storage {0355}
1982/11/29 Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29 Improvements Made To Fuel Ratio Control {1278}
1982/11/22 Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22 New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22 Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/12/13 6V6190 Gauge Group Can Be Used To Measure Track Roller And Link Wear{0653}
1982/12/13 New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/20 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20 Replacement Seal Group For Raw Water Pump Shaft Now Has All The Seal Parts Plus An Installation Tool{1371,0622}
1982/12/20 New Piston Design Decreases Oil Consumption{1214,1215}
1983/01/10 Water Pump Impellers Can Be Reconditioned{0661,1361}
1983/01/10 Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10 Spring Seat Enlarger Available For Use On Cylinder Heads{0663}
1983/01/10 New Dome Lamp Used{7333}
1983/01/10 Correct Installation Of Valve Lifter Prevents Problems With Valve Lash Adjustment{1102}
1983/01/10 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles{0626,1254}
1983/01/17 Oil Filter Removal{1318,0611}