Before/After
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXISTING 373-6631 HYDRAULIC FAN PUMP WITH A NEW 4959595/">495-9595 FAN PUMP GROUP ON CERTAIN D10T LARGE TRACK-TYPE TRACTORS |
1387 5070
|
PS45345 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45345" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 23Dec2016 Service Letter. Changes have been made to the Service Claim Allowances. |
The existing 373-6631 Hydraulic Fan Pump may wear prematurely and fail on certain D10T Large Track-Type Tractors. If the existing hydraulic fan pump fails, it can/will fail the rotary group internal to the pump, generate debris, contaminate the fan system, and cause extensive damage to other components. It is better to replace the fan pump at the very earliest convenience prior to a potential major failure. |
Qty |
Part Number |
Description |
2 |
1P3703 |
SEAL-RECTANGULAR |
2 |
1S0994 |
CLIP-LOOP |
2 |
2M9780 |
SEAL-O-RING-STOR |
1 |
2S4078 |
SEAL-O-RING |
2 |
3D2824 |
SEAL-O-RING-STOR |
1 |
3J1907 |
SEAL-O-RING-STOR |
4 |
3J7354 |
SEAL-O-RING-STOR |
1 |
3P2404 |
CLIP |
1 |
4J0522 |
SEAL-O-RING |
1 |
5F3106 |
SEAL-O-RING |
1 |
5K9090 |
SEAL-O-RING-ORFS |
1 |
5V9221 |
SPACER |
6 |
6V8398 |
SEAL-O-RING-ORFS |
4 |
6V8400 |
SEAL-O-RING-ORFS |
1 |
6V8637 |
ADAPTER-STR |
2 |
6V8638 |
ADAPTER-STR |
1 |
6V8786 |
ADAPTER-TEE |
1 |
6V8948 |
ADAPTER-STR |
12 |
6V9746 |
SEAL-O-RING-ORFS |
1 |
6V9834 |
CAP-ORFS |
1 |
6V9837 |
ADAPTER-TEE |
1 |
7G3832 |
GROMMET |
1 |
7G3833 |
CLIP-HALF TAB |
1 |
7G3834 |
CLIP |
3 |
7J9108 |
SEAL-O-RING-ORFS |
7 |
7K1181 |
STRAP-CABLE |
1 |
8T0404 |
ADAPTER-ELBOW |
2 |
8T4121 |
WASHER-HARD |
1 |
8T4136 |
BOLT-HEX HEAD |
2 |
8T4194 |
BOLT-HEX HEAD |
12 |
8T4223 |
WASHER-HARD |
8 |
8T4956 |
BOLT-HEX HEAD |
2 |
8T8899 |
ADAPTER-ELBOW |
1 |
8T9391 |
BOLT |
2 |
1756085 |
FLANGE |
1 |
2042281 |
STRAP-CABLE |
2 |
3293356 |
NUT-HEX |
1 |
3445675 |
NUT-HEX |
1 |
3523965 |
CLIP-LADDER |
1 |
4959595 |
PUMP GP-PS-BSC-V |
1 |
5154709 |
HOSE AS |
1 |
5154710 |
HOSE AS |
1 |
5154711 |
HOSE AS |
1 |
5154712 |
HOSE AS |
1 |
5154713 |
HOSE AS |
1 |
5154714 |
HOSE AS |
1 |
5157944 |
HOSE AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 17% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Refer to M0074138, Special Instruction, "D10T2 Fan Pump Update", for replacement of the hydraulic fan pump and ensuing parts list.
For machines equipped with the 359-6488 Ladder Arrangement, please take care to follow the Special Instruction for part number substitutions and additions.
Refer to Hydraulic Information System (HIS) to build the hose assemblies that are listed in the Parts Needed. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-6000 hrs, 0-24 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
6001-12000 hrs, 25-48 mo |
33.0% |
50.0% |
0.0% |
0.0% |
50.0% |
50.0% |
NOTE: This is a 15.0-hour job
|
Reasonable Travel Time and Mileage are allowed. |
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|