1982/10/11 Caterpillar


Hose Presses Can Now Be Used To Service 9.52 mm (.375") JIC Couplings{0623,0624,7554}

Usage:


The 8S6417 Coupling can now be installed on 9.52 mm (.375") inside diameter XT-3 Hose with the 7S1100 and 6V4900 Hose Press Arrangements. This coupling needs different tools for installation and removal than the other hose fittings for 9.52 mm (.375") inside diameter XT-3 Hose. The tools which are needed are shown in the chart.

This coupling fits into the tools, differently. Do not push against the nut because this can damage the coupling or the tools. Push only against the face of the coupling.

Caterpillar Information System:

1982/10/11 Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack{1257}
1982/10/11 Extended Storage Procedures{1000,3300}
1982/10/11 New Fasteners Used For Fuel Injection Lines{1252}
1982/10/11 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11 Altronic III Ignition Systems Available{1560}
1982/10/11 Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11 Field Conversion Procedure For EPA Certified On-Highway Truck And On-Highway Vehicle Engines{0374,0375,7557,1250}
1982/10/11 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications{0651,1250,1156,1157}
1982/10/11 Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/04 New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04 New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04 Improvements Made To Marine Transmissions{3300}
1982/10/11 Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material){1230,1203,1219}
1982/10/18 New Coolant Level Switch Used{7470,1354}
1982/10/18 Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18 Improved Valve Cover Seal{1107}
1982/10/18 Tools For Use With 7S1100 Hydraulic Press To Assemble Couplings On 31.8 mm (1.25") I.D. XT-6 Hose{0624,7554}
1982/10/18 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18 Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18 Additional 3208 Remanufactured Truck Engines Available{1000,1200}
1982/10/18 FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/25 Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25 New 6V6080 Torque Multiplier Available{0614}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.