New Water Lines Groups are Used for Venting of the Separate Circuit Aftercooler {1380}
- Engine:
- 3508B (S/N: CNB1-UP; 1TW1-UP)
- 3512B (S/N: CMC1-UP; BLF1-UP; 8RM1-UP; 6WN1-UP; 4AW1-UP)
- 3516B (S/N: FDN1-UP; 6HN1-UP; 7RN1-UP; 9AN1-UP)
Description of Change: New water lines groups provide venting of the aftercooler system on gensets that have a CVS radiator. This is needed so that the jacket water coolant and the aftercooler coolant do not mix.
Adaptable To: The new water lines groups are adaptable to all of the 3500 Engines that are listed above. Table 1 lists the effectivity of the new water lines groups for 3500 Engines. Table 2 lists the radiators, the radiator groups, and the water lines groups that are used for 3500 Engines with CVS radiators.
Show/hide table
Effectivity     | |
Sales Model     | Serial Number     |
3508B     | S/N:CNB01023-UP     |
3508B     | S/N:1TW00361-UP     |
3512B     | S/N:CMC01031-UP     |
3512B     | S/N:BLF00163-UP     |
3512B     | S/N:8RM00759-UP     |
3512B     | S/N:6WN00803-UP     |
3512B     | S/N:4AW00876-UP     |
3516B     | S/N:FDN01441-UP     |
3516B     | S/N:6HN01707-UP     |
3516B     | S/N:7RN01955-UP     |
3516B     | S/N:9AN00373-UP     |
Show/hide table
CVS Radiators     | |||
Sales Model     | Radiator     | Radiator Gp     | Water Lines Gp     |
3508B     | 35 CVS, .770     | 180-4389     | 248-2790     |
3508B     | 46 CVS, 3/4 5R     | 180-4400     | 248-2789     |
3508B     | 52 CVS, .357     | 180-4402     | 251-6783     |
3512B     | 46 CVS     | 180-4391     | 248-2792     |
3512B     | 46 CVS, .357     | 180-4404     | 248-2792     |
3512B     | 52 CVS, .536     | 180-4394     | 248-2793     |
3512B     | 60 CVS, .374     | 180-4406     | 248-2793     |
3512B     | 72 CVS, .374     | 180-4408     | 251-6784     |
3516B     | 52 CVS, 3/4     | 180-4410     | 248-2793     |
3516B     | 52 CVS, .536     | 206-4876     | 248-2793     |
3516B     | 52 CVS-3/4, .536     | 180-4398     | 248-2793     |
3516B     | 52 CVS-3/4, .374     | 180-4412     | 248-2793     |
3516B     | 60 CVS, 3/4     | 180-4424     | 248-2793     |
3516B     | 60 CVS, .536     | 206-4877     | 248-2793     |
3516B     | 60 CVS, .561     | 180-4396     | 248-2793     |
Show/hide table
Illustration 1 | g01060883 |
Typical 3508 example (1) Vent line (2) Radiator group |
Show/hide table
Illustration 2 | g01060920 |
Typical 3512/3516 example (1) Vent line (2) Radiator group |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
3406E, C-10 and C-12 On-highway Engines Diagnostic Codes
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
3500B Marine Propulsion Engines Battery - Replace
C15 and C18 Generator Set Engines Electronic Unit Injector - Remove
2006/01/02 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
2004/04/01 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
3406E, C-10, C-12, C-15, C-16 Truck Engines Product Storage
3406E, C-10 and C-12 On-highway Engines Poor Acceleration or Response
Product Link - PL102C System Overview
3406E, C-10 and C-12 On-highway Engines Low Power/Poor or No Response to Throttle
C15 and C18 Industrial Engines Belt Tightener
G3300 Engines Cooling System Coolant (NGEC) - Change
C-12 Generator Set Engine CID 0268 FMI 02 Check Programmable Parameters
SCJ and 8SC Series Alternators Service Tools
SCJ and 8SC Series Alternators Charging System
C-10 and C-15 Petroleum Engines Engine Speed/Timing Sensor Circuit - Test
C18 Generator set and C18 Marine Engines Heat Exchanger - Disassemble - With Fuel Cooler
C18 Generator set and C18 Marine Engines Heat Exchanger - Assemble - Without Fuel Cooler
2004/06/01 Realignment of Air System Components is Recommended. {1063}
C15 Petroleum Engine After Stopping Engine
C-10 and C-15 Petroleum Engines Ether Injection System - Test
G3408 and G3412 Engines Engine Operation
G3408C and G3412C Engines Before Starting Engine