MID 018 - CID 0770 - FMI 09 Cat Data Link #2 communications
产生此代码的情况:
电子控制模块无法通过 Cat 数据链路进行通信。 已发生以下一种状况：
- 电子控制模块之间的 Cat 数据链路接线开路。
- 通信链路有干扰。
- ECM 故障。
系统响应:
如果发动机未运转，发动机将不能起动。 如果发动机正在运转，发动机将关停。
测试步骤 1. 进行以下的诊断步骤: Cat 数据链路
结果:
- 正常 - 停止
Caterpillar Information System:
2004/03/01 New Voltage Regulator Is Now Used {4467}
2004/03/01 Caterpillar Digital Voltage Regulator (CDVR) Is Now Being Used {4467}
G3516B Engines Engine Shutdown (Unexpected)
C15 Engine Electronics Grounding Stud - Inspect/Clean/Tighten
G3516B Engines Engine Overload
C18 Generator set and C18 Marine Engines Water Lines - Remove and Install
3500C Marine Engines Aftercooler Coolant Temperature Sensor
G3516B Engines Driven Equipment
C18 Generator set and C18 Marine Engines Exhaust Elbow - Remove and Install
3512B Generator Set Engine Turbocharger Exhaust Temperature Sensor
2004/04/01 Replacement of the Injection Actuation Pressure Control Valve {5051}
G3500 Engines Air/Fuel Ratio Control - Adjust
C-15 Petroleum Engine Reference Material
3500B Engines Valve Cover Base - Remove and Install
C7 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
G3516B Engines Diagnostic Codes
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Remove
C13, C15, and C18 Generator Set Engines General Information
3500B and 3500C Marine Engines Engine Harness - Rigid Wiring Harness
2004/03/22 New High Efficiency Oil Filters are Now Available {1308}
2004/03/01 New High Efficiency Oil Filters are Now Available {1308}
2004/03/01 New High Efficiency Oil Filters are Now Available {1308}
3412E and C30 Marine Engines Basic Engine
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Install