Exhaust Manifold
Show/hide table
 | |
| Illustration 1 | g01224705 |
(A) Tighten the four studs to the following torque. ... 35 ± 5 N·m (26 ± 4 lb ft)
- Tighten bolt (1) through bolt (15) in a numerical sequence. Tighten the bolts to a torque of 4 ± 1 N·m (35 ± 9 lb in).
- Tighten bolt (1) through bolt (15) in a numerical sequence. Tighten the bolts to a torque of 55 ± 5 N·m (41 ± 4 lb ft).
Caterpillar Information System:
C27 and C32 Engines Turbocharger - Inspect
C7 Marine Engine Heat Exchanger
2004/04/01 Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/03/15 New Tool Helps Configure Engine Speed Controller and Adjust Engine Speed Controller {0778, 0781}
2004/02/16 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
2004/03/01 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
C32 Marine and Marine Generator Set Engines Engine Oil Pressure - Test
C15 On-Highway Engine Compression - Test
C7 Marine Engine Valve Mechanism
C32 Marine and Marine Generator Set Engines Closed Crankcase Ventilation (CCV) System
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
C27 and C32 Engines Engine Crankcase Pressure (Blowby) - Test
C32 Marine Engines Excessive Engine Oil Consumption - Inspect
C27 and C32 Engines Cooling System - Inspect
C27 and C32 Engines Vibration Damper - Check
C32 Marine Engine Cylinder Head
2004/05/01 Two New Tools Check Tension on Engine Belts {0701, 0767}
Field Installation Procedure for Redundant Electronic Overspeed Protection{1915} Field Installation Procedure for Redundant Electronic Overspeed Protection{1915}
G3500 Engines Diagnostic Code Will Not Clear
G3500 Engines Electronic Service Tool Displays UNDETERMINED
G3500 Engines Electronic Service Tool Will Not Communicate with ECM
G3500 Engines Engine Coolant Temperature (High)
G3500 Engines Engine Coolant Temperature (Low)