Maintenance Interval Schedule
Note: All safety information, warnings, and instructions must be read and understood before you perform any operation or any maintenance procedure.
Undercarriage - Check
Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must be performed.
When Required
Track Adjustment - AdjustEvery 10 Service Hours or Daily
Track Adjustment - InspectUndercarriage - Check
Initial 250 Service Hours
Final Drive Oil - ChangeEvery 250 Service Hours or Monthly
Final Drive Oil Level - CheckEvery 500 Service Hours
Final Drive Oil Sample - ObtainEvery 2000 Service Hours or 1 Year
Final Drive Oil - ChangeCaterpillar Information System:
C32 Marine Engine Cooling System - Test
C15 Petroleum Generator Set Engines Inlet Manifold Air Pressure Sensor
C32 Marine Engine Cooling System - Check - Overheating
C32 Marine Engines Aftercooler - Test
C32 Marine Engine Exhaust Temperature - Test
C32 Marine Engine Cooling System
C7 Marine Engine Coolant Level Sensor - If Equipped
C7 Marine Engine Engine Oil Temperature Sensor
2004/03/29 Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
C7 Marine Engine Fuel Pressure Sensor - If Equipped
3126B Petroleum Engine Auxiliary Water Pump
C9 Marine Engines and C9 Marine Generator Sets Air Inlet Heater - Install
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478} Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Cat Commercial Diesel Engine Fluids Recommendations Extended Life Coolant
3600 and C280 Diesel Engine Fluids Recommendations Extended Life Coolant Cooling System Maintenance
C7 Marine Engine Electric Starting Motor
C7 Marine Engine Electric Starting Motor
C32 Marine and Marine Generator Set Engines Closed Crankcase Ventilation (CCV) System
C7 Marine Engine Valve Mechanism
C15 On-Highway Engine Compression - Test
C32 Marine and Marine Generator Set Engines Engine Oil Pressure - Test
2004/03/01 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
2004/02/16 Hydraulically Fractured Connecting Rods are Now In Production for 3054, 3054B, 3054C, 3054E and 3056E Engines {1218}
2004/03/15 New Tool Helps Configure Engine Speed Controller and Adjust Engine Speed Controller {0778, 0781}