The Water Resistance of the Wiring Harness Has Improved {1408}
- Engine:
- 3508B (S/N: 3DM1-UP; 7SM1-UP; 1TW1-UP; 2BM1-UP; 3DW1-UP)
- 3512B (S/N: 7HM1-UP; 8EM1-UP; 4TN1-UP; 1PW1-UP; 2GW1-UP; BRN1-UP)
- 3516B (S/N: CDE1-UP; CBN1-UP; 8KN1-UP; 9AN1-UP; 2FW1-UP; 4BW1-UP; 8CN1-UP; 3CW1-UP)
- 3508 (S/N: 3PS1-UP)
- 3512 (S/N: 3RS1-UP)
- 3516 (S/N: 3SS1-UP)
The 139-8529 Harness has been improved. The current change provides a waterproof seal of the harness. Heat shrink tube has been added to the entire length of the harness in order to provide a water tight seal between the harness connectors.
Field repair of the previous design of the harness is not recommended. Complete replacement of the harness is suggested.
The current harness is effective with the engines that are listed in Table 1.
Show/hide table
 | |
| Illustration 1 | g01030026 |
139-8529 Harness | |
Show/hide table
| Engine Serial Number |
| S/N:4BW546-UP |
| S/N:1TW347-UP |
| S/N:1PW427-UP |
| S/N:7SM911-UP |
| S/N:3DM451-UP |
| S/N:8EM508-UP |
| S/N:8KN567-UP |
| S/N:9AN358-UP |
| S/N:4TN787-UP |
| S/N:CBN312-UP |
| S/N:7HM264-UP |
| S/N:2FW334-UP |
| S/N:2GW402-UP |
| S/N:CDE313-UP |
| S/N:3CW254-UP |
| S/N:3DW175-UP |
| S/N:8CN212-UP |
| S/N:2BM186-UP |
| S/N:BRN191-UP |
| S/N:3PS197-UP |
| S/N:3RS340-UP |
| S/N:3SS324-UP |
Caterpillar Information System:
3408C, 3412C and 3412D High Performance Marine Engines General Information
3408C, 3412C and 3412D High Performance Marine Engines Engine Design
2003/10/20 An Improved Turbocharger is Used {1052}
C9 Marine Engines and C9 Marine Generator Sets Crankshaft Gear - Remove and Install
2003/10/01 Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
C3.3 Industrial Engine Bearing Clearance - Check
2003/10/01 New Seals for the Front Housing {1151, 1207}
3456 Generator Sets Maintenance Interval Schedule - Prime Power Generator Sets
3456 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
2003/11/01 A New Seal and Oil Pan Provides Improved Sealing {1302, 1302}
3126B Industrial Engine Water Pump - Remove
2003/11/01 Introduction of New Pistons and Remanufactured Cylinder Packs {1214, 1239}
2003/10/01 Proper Termination Techniques May Increase Digital Voltage Regulator (DVR) Reliability {4467}
3408C, 3412C and 3412D High Performance Marine Engines Electronic Control System Components
G3500 Engines Gear Group (Front) - Reverse Rotation
C9 Marine Engines and C9 Marine Generator Sets Electronic Unit Injector Sleeve - Remove
C9 Marine Engines and C9 Marine Generator Sets Electronic Unit Injector Sleeve - Install
3408C, 3412C and 3412D High Performance Marine Engines Fuel System
2013/08/21 Recommendations for Gas Engine Spark Plugs {1550, 1555}
C18 Marine Engines Engine Oil and Filter - Change
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Differential Pressure Switch Circuit - Test
SPP101 Skid Mounted Pumper Safety Messages
SPP101 Skid Mounted Pumper Plate Locations and Film Locations
SPP101 Skid Mounted Pumper Reference Material