Usage:
NOTE: The battery was removed for better photo illustration only.
1. Loosen fan belt tightener (1), and move fan belt (2) off the pulley.
2. Remove both halves of fan guard (3) from the radiator guard.
| NOTICE |
|---|
Use extra care not to damage the radiator or oil cooler core when the fan is removed. |
3. Remove six bolts, nuts and washers (4). Pull the fan and adapter off the bearing and O-ring seal on the fan drive. Remove fan (5) out of the right side of the machine. Weight is 20 kg (45 lb.).
Install Fan
1. Put fan (1) in position on the fan drive through the opening on the right side of the machine as shown. Install the six bolts, nuts and washers that hold the fan in position on the fan drive.
2. Install both halves of fan guard (2) on the radiator guard.
3. Put fan belt (3) in position on the pulleys on the crankshaft, fan drive and fan belt tightener (4).
4. Adjust the fan belt. See the V-Belt Tension Chart that follows. When the fan belt tension is correct, tighten the bolt in fan belt tightener (4).
