Water Directors
Usage:
Remove And Install Water Directors
Start By:
a. remove cylinder head assembly and spacer plate
1. Remove old water directors (1) from the cylinder head.
2. Clean the cylinder head.
3. Install new water directors in the cylinder head with the notch in the water director in alignment with the "V" mark on the cylinder head. Install the water director to a depth of 0.8 ± 0.6 mm (.03 ± .02 in.) below the surface of the cylinder head.
End By:
a. install cylinder head assembly and spacer plate
Caterpillar Information System:
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Spacer Plate
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Valve Seat Inserts
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Valve Guides
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Valves
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Valve Lifters
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Cylinder Head
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Rocker Shaft
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Rocker Shaft And Push Rods
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Valve Cover
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Exhaust Manifold
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Oil Pump
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Oil Pan Plate
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Vibration Damper And Pulley
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Engine Front Support
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Timing Gear Cover
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Timing Gears And Plate
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Flywheel
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Flywheel Housing
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Rear Accessory Drive Gears
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Air Conditioner Compressor
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Engine
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Camshaft
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Camshaft Bearings
3306 VEHICULAR ENGINE FOR D6H & D7H TRACTORS Pistons And Connecting Rods