Crankshaft
Show/hide table
 | |
| 图 1 | g03408140 |
Show/hide table
| 189-4917 曲轴总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 有关曲轴轴颈的更多信息，请参阅技术规格, "连杆和主轴承轴颈"。 | |||
| 关于弯曲曲轴的正确测量步骤，请参阅再使用零件和修补操作指南, SEBF8054, "测量和拉直弯曲曲轴的步骤"。 | |||
| 1 | 2 | 253-1752 止推片 | 止推片只能安装在曲轴的中央主轴承轴颈上。 |
| A | 1 | 4N-0684 定位销 | 定位销在曲轴端面最长突出 6.4 mm (0.25 in)。 |
| 2 | 1 | 223-9135 曲轴齿轮 | 装配后曲轴齿轮的平均直径为 220.34 ± 0.19 mm (8.675 ± 0.007 in)。 装配后曲轴齿轮的最大直径为 220.56 mm (8.683 in)。 |
| B | |||
| D | 安装有止推垫圈情况下的端隙测量值如下。 端隙必须符合或介于以下所列的测量值之间。 最小： 0.11 mm (0.004 in) 最大： 0.57 mm (0.022 in) |
||
Show/hide table
 | |
| 图 2 | g03408141 |
C-C 视图 | |
Show/hide table
| 189-4917 曲轴总成 的技术规格 | |||
| E | 1 | 7S-5005 定位销 | 定位销在曲轴端面突出 4.1 ± 0.5 mm (0.16 ± 0.02 in)。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Coolant Temperature Sensor
3500B and 3500B High Displacement Generator Set Engines Diagnostic Codes
G3520B Engines Ignition Transformers Primary Circuit
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor General Information
2002/07/01 A New Liquid Detector Group Is Used In Continuous Prelube Systems {1319, 1469}
C-10 and C-12 Truck Engines Belt Tensioner
G3520B Engines Fuel Metering Valve
G3600 Engines Flexible Coupling
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil and Filter - Change
C4.4 (Mech) Industrial Engine Cooling System Coolant (ELC) - Change
G3600 Engines Flexible Coupling
C15 Petroleum Generator Set Engines Connecting Rod Bearing Journal
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Programming Parameters
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Dimensions
C-15, C-16, and C-18 Truck Engines Connecting Rod
2002/09/02 New Quick Disconnect Fitting Offers Improved "Connection Under Pressure" for Work Tool Lines {5057}
C13, C15, and C18 Generator Set Engines Piston and Rings
C18 Marine and Marine Generator Set Engines Front Housing and Covers
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Main Bearing Journal
C-10, C-12 and C-15 On-Highway Engines Safety Messages
C18 Marine Auxiliary and Marine Generator Set Engines Flywheel Housing
2002/07/01 A New Systems Operation Module Provides Information About The Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters For G3600 and 3600 Engines {1333, 1383}
C-10, C-12 and C-15 On-Highway Engines Monitoring System