Belt Tensioner
Show/hide table
Illustration 1 | g00390952 |
Use the following procedure in order to adjust the belt tensioner:
- Remove the belt so that there is no tension on the belt tensioner.
- Align the thick black line on 134-1018 Film (1) with shoulder (2) of the tensioner's arm (3) .
- Install the belt. Shoulder (2) should be in the green zone of 134-1018 Film (1) .
Show/hide table
Illustration 2 | g00903404 |
(4) Idler pulley assembly
Tighten the bolt to the following value. ... 50 ± 5 N·m (36.8 ± 3.7 lb ft)
Caterpillar Information System:
G3520B Engines Fuel Metering Valve
G3600 Engines Flexible Coupling
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil and Filter - Change
C4.4 (Mech) Industrial Engine Cooling System Coolant (ELC) - Change
G3600 Engines Flexible Coupling
C18 Marine and Marine Generator Set Engines Valve Mechanism Cover
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cooling System Coolant (DEAC) - Change
G3600 Engines Flexible Coupling
G3520B Engines Electrical Power Supply
2005/12/19 A New Check Valve Assembly is Used in the Prechamber Groups {1106}
3034 Marine Engine Engine Valve Lash - Inspect/Adjust
G3520B Engines ECM Status Indicator Output
2002/07/01 A New Liquid Detector Group Is Used In Continuous Prelube Systems {1319, 1469}
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor General Information
G3520B Engines Ignition Transformers Primary Circuit
3500B and 3500B High Displacement Generator Set Engines Diagnostic Codes
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Coolant Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines Crankshaft
C15 Petroleum Generator Set Engines Connecting Rod Bearing Journal
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Programming Parameters
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Dimensions
C-15, C-16, and C-18 Truck Engines Connecting Rod
2002/09/02 New Quick Disconnect Fitting Offers Improved "Connection Under Pressure" for Work Tool Lines {5057}