Main Bearing Journal
Show/hide table
Diameter of C0.5 Main Bearing Journals | |||
Size | Journal | Diameter | Service limit |
Standard | 1 | |
|
2 | |
|
|
Undersize |
1 | |
|
2 | |
|
|
Undersize |
1 | |
|
2 | |
|
Show/hide table
Diameter of C0.7 Main Bearing Journals | |||
Size | Journal | Diameter | Service limit |
Standard | 1 and 2 | |
|
3 | |
|
|
Undersize |
1 and 2 | |
|
3 | |
|
|
Undersize |
1 and 2 | |
|
3 | |
|
Show/hide table
Diameter of C1.1/3011C Main Bearing Journals | |||
Size | Journal | Diameter | Service limit |
Standard | 1 and 2 | |
|
3 | |
|
|
Undersize |
1 and 2 | |
|
3 | |
|
|
Undersize |
1 and 2 | |
|
3 | |
|
Show/hide table
Diameter of C1.6 Main Bearing Journals | |||
Size | Journal | Diameter | Service limit |
Standard | 1, 2 and 3 | |
|
4 | |
|
|
Undersize |
1, 2 and 3 | |
|
4 | |
|
|
Undersize |
1, 2 and 3 | |
|
4 | |
|
Show/hide table
Diameter of 3013C/C1.5 and C2.2/3024C and C2.2/3024CT Main Bearing Journals | ||
Journals | Diameter | Service limit |
Standard | |
|
Undersize |
|
|
Undersize |
|
|
Show/hide table
(1) | If the diameter of the main bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced. |
Clearance between the main bearing and the main bearing journal
- C0.5 Journal 1 ...
0.035 to 0.088 mm (0.0014 to 0.0035 inch) - C0.5 Journal 2 ...
0.039 to 0.092 mm (0.0015 to 0.0036 inch) - C0.5 Journal 2 ...
Standard clearance
- C0.7 Journals 1 and 2 ...
0.039 to 0.106 mm (0.0015 to 0.0042 inch) - C0.7 Journal 3 ...
0.039 to 0.092 mm (0.0015 to 0.0036 inch) - C0.7 Journal 3 ...
- C1.1/3011C and C1.6 ...
0.039 to 0.106 mm (0.0015 to 0.0042 inch)
- C1.5/3013C, C2.2/3024C and C2.2/3024CT ...
0.044 to 0.102 mm (0.0017 to 0.0040 inch)
Service limit (All models) ...
Caterpillar Information System:
C18 Marine and Marine Generator Set Engines Front Housing and Covers
C13, C15, and C18 Generator Set Engines Piston and Rings
2002/09/02 New Quick Disconnect Fitting Offers Improved "Connection Under Pressure" for Work Tool Lines {5057}
C-15, C-16, and C-18 Truck Engines Connecting Rod
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Dimensions
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Programming Parameters
C15 Petroleum Generator Set Engines Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Coolant Temperature Sensor
3500B and 3500B High Displacement Generator Set Engines Diagnostic Codes
G3520B Engines Ignition Transformers Primary Circuit
C-10, C-12 and C-15 On-Highway Engines Safety Messages
C18 Marine Auxiliary and Marine Generator Set Engines Flywheel Housing
2002/07/01 A New Systems Operation Module Provides Information About The Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters For G3600 and 3600 Engines {1333, 1383}
C-10, C-12 and C-15 On-Highway Engines Monitoring System
3406E and C15 Marine Engines Engine Oil Filter Base
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
G3520B Engines Ignition Transformers Secondary Circuit and Spark Plugs
G3520B Engines Inspecting Electrical Connectors
G3520B Engines Integrated Temperature Sensing Module (ITSM)
G3520B Engines Oxygen Sensor Buffer Supply
G3520B Engines Oxygen Sensor Signal