Flywheel Housing
Show/hide table
Illustration 1 | g01248904 |
Note: During assembly, inspect the following components for any foreign materials: the front face of the flywheel housing, the two sides of the flywheel housing gasket and the rear face of the cylinder block. These components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds and any other foreign material. Apply a small amount of 8T-9022 Silicone Gasket in order to fill the space between the cylinder block, the flywheel housing, and the oil pan before installing the oil pan gasket and the oil pan.
Use the following procedure to tighten the flywheel housing bolts:
- Tighten bolt (1) through bolt (9) to
100 ± 20 N·m (75 ± 15 lb ft) . - Tighten bolt (10) through bolt (24) to
40 ± 10 N·m (30 ± 7 lb ft) . - Tighten bolt (1) through bolt (9) to
135 ± 20 N·m (100 ± 15 lb ft) . - Tighten bolt (10) through bolt (24) to
55 ± 10 N·m (41 ± 7 lb ft) .
Show/hide table
Illustration 2 | g01248956 |
(25) Torque for the plug ...
Caterpillar Information System:
C-10, C-12 and C-15 On-Highway Engines Safety Messages
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Main Bearing Journal
C18 Marine and Marine Generator Set Engines Front Housing and Covers
C13, C15, and C18 Generator Set Engines Piston and Rings
2002/09/02 New Quick Disconnect Fitting Offers Improved "Connection Under Pressure" for Work Tool Lines {5057}
C-15, C-16, and C-18 Truck Engines Connecting Rod
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Dimensions
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Programming Parameters
C15 Petroleum Generator Set Engines Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines Crankshaft
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Coolant Temperature Sensor
2002/07/01 A New Systems Operation Module Provides Information About The Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters For G3600 and 3600 Engines {1333, 1383}
C-10, C-12 and C-15 On-Highway Engines Monitoring System
3406E and C15 Marine Engines Engine Oil Filter Base
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
G3520B Engines Ignition Transformers Secondary Circuit and Spark Plugs
G3520B Engines Inspecting Electrical Connectors
G3520B Engines Integrated Temperature Sensing Module (ITSM)
G3520B Engines Oxygen Sensor Buffer Supply
G3520B Engines Oxygen Sensor Signal
3054E Industrial Engine Rocker Shaft
G3520B Engines PWM Sensor