3034 Marine Engine Caterpillar


Fuel Shutoff Solenoid - Test

Usage:

3034 CPP



Illustration 1g00902628

This procedure tests the fuel shutoff solenoid for correct operation.

  1. Remove the fuel shutoff solenoid from the engine. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".

  1. Connect the fuel shutoff solenoid to a 12 volt power source.

  1. When the fuel shutoff solenoid is connected, the plunger should extend. The plunger should remain extended until the circuit is de-energized. If the fuel shutoff solenoid fails this test, replace the fuel shutoff solenoid.

  1. Install the fuel shutoff solenoid on the engine. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".

Caterpillar Information System:

3034 Marine Engine Glow Plugs - Test
G3520B Engines ECM Output Circuit (Fuel Control)
3034 Engine for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
3056E Industrial Engine Finding Top Center Position for No. 1 Piston
C-10, C-12 and C-15 On-highway Engines 0173-11 Very High Exhaust Gas Temperature Derate
C-10, C-12 and C-15 On-highway Engines 0173-00 High Exhaust Gas Temperature Derate
C-10, C-12 and C-15 On-highway Engines 0102-07 Boost Pressure not responding
C7 and C9 On-Highway Engines 0102-02 Boost Pressure signal erratic
C7 and C9 On-Highway Engines 0102-01 Low Boost Pressure (25)
3056E Industrial Engine Fuel Injection Timing - Check
G3520B Engines Detonation Sensors
3126B Engine for Caterpillar Built Machines Injection Actuation Pressure - Test
G3520B Engines ECM Output Circuit (Starting Motor)
C-10, C-12 and C-15 On-highway Engines Poor Acceleration or Response
C-10, C-12 and C-15 On-highway Engines Low Power/Poor or No Response to Throttle
C-10, C-12 and C-15 On-highway Engines Intermittent Low Power or Power Cutout
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Intermittent Cruise Control, Idle, or PTO Kickout
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Cruise Control, Idle, or PTO Can Not Be Set
G3520B Engines ECM Status Indicator Output
3034 Marine Engine Engine Valve Lash - Inspect/Adjust
2005/12/19 A New Check Valve Assembly is Used in the Prechamber Groups {1106}
G3520B Engines Electrical Power Supply
G3600 Engines Flexible Coupling
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cooling System Coolant (DEAC) - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.