PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC LINES ROUTING ACROSS THE ARTICULATION HITCH ON CERTAIN 993K WHEEL LOADERS
Usage:
REBE7613-00
Show/hide table
| 18Oct2011 |
U-449
A-368
D-397
O-397
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC LINES ROUTING ACROSS THE ARTICULATION HITCH ON CERTAIN 993K WHEEL LOADERS |
|
| 5057 7100 | PS52113 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52113" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2013 |
PROBLEM
Show/hide table
| The existing hydraulic lines routing across the articulation hitch can fail due to hydraulic lines routing on certain 993K large wheel loaders. If the existing hydraulic lines routing across the articulation hitch fails it can be reworked with an improved hydraulic lines routing for longer service life. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 993K | Z9K00269-00356 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 5 | 6V7687 | LOCKNUT |
| 3 | 7D1649 | WASHER-HARD |
| 4 | 7X0507 | WASHER-HARD |
| 2 | 8T4182 | BOLT-HEX HEAD |
| 12 | 8T4223 | WASHER-HARD |
| 5 | 8T4910 | BOLT-HEX HEAD |
| 3 | 1600012 | CLIP- 2 PIECE |
| 3 | 1600013 | CLIP-2 PIECE |
| 3 | 2259199 | SPACER |
| 1 | 3515589 | BRACKET AS |
| 1 | 3515590 | BELT |
| 1 | 3515591 | HOSE AS |
| 1 | 3515592 | HOSE AS |
| 1 | 3515798 | HOSE AS |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to REHS5444, "Instruction For Improving Hydraulic Lines Routing", for the rework instructions. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
25-36 mo |
||||||
Show/hide table
| NOTE: This is a 12.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BEARINGS ON THE ROD END OF THE STEERING CYLINDER ON CERTAIN 966K AND 972K WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BEARINGS ON THE ROD END OF THE STEERING CYLINDER ON CERTAIN 966K AND 972K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ARD COOLANT LINES AND CLIPPING ON CERTAIN D8T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ARD COOLANT LINES AND CLIPPING ON CERTAIN D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE REAR WINDOW JOINTS ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE REAR WINDOW JOINTS ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 3G8932 ANGLE CYLINDER PINS ON CERTAIN D6N TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 3G8932 ANGLE CYLINDER PINS ON CERTAIN D6N TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LEFT-HAND STEERING CONSOLE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE LEFT-HAND STEERING CONSOLE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BACKUP ALARM ON CERTAIN D6T, D6T XL, D6T XW, D6T LGP, D6T P XL, D6T P XW, AND D6T P LGP TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BACKUP ALARM ON CERTAIN D6T, D6T XL, D6T XW, D6T LGP, D6T P XL, D6T P XW, AND D6T P LGP TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MAIN POWER DISCONNECT SWITCH ON CERTAIN 994H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MAIN POWER DISCONNECT SWITCH ON CERTAIN 994H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW BRACKET TO ELIMINATE POSSIBILITY OF A SHORT BETWEEN THE JUMP START RECEPTACLE BATTERY CABLE ASSEMBLY AND THE QUICK DISCONNECT SWITCH ON CERTAIN D8T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW BRACKET TO ELIMINATE POSSIBILITY OF A SHORT BETWEEN THE JUMP START RECEPTACLE BATTERY CABLE ASSEMBLY AND THE QUICK DISCONNECT SWITCH ON CERTAIN D8T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION CASE AND THE 1ST/3RD SHAFT ON CERTAIN 525C, 535C AND 545C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION CASE AND THE 1ST/3RD SHAFT ON CERTAIN 525C, 535C AND 545C WHEEL SKIDDERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOLTS ON THE FUEL TANK ON CERTAIN 966K AND 972K WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOLTS ON THE FUEL TANK ON CERTAIN 966K AND 972K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE NRS VENTURI, THERMOSTAT, ENGINE SOFTWARE, AND MACHINE SOFTWARE ON CERTAIN D6T AND D7E TRACK-TYPE TRACTORS - MULTIPLE REPAIRS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE NRS VENTURI, THERMOSTAT, ENGINE SOFTWARE, AND MACHINE SOFTWARE ON CERTAIN D6T AND D7E TRACK-TYPE TRACTORS - MULTIPLE REPAIRS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP SOLENOID COILS AND RELATED COMPONENTS ON CERTAIN 993K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT PUMP SOLENOID COILS AND RELATED COMPONENTS ON CERTAIN 993K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM TO INSPECT AND POSSIBLY REMOVE 358-9475, 358-9476, AND 358-9477 TANK BREATHERS FROM DEALER PARTS STOCK PRODUCT SUPPORT PROGRAM TO INSPECT AND POSSIBLY REMOVE 358-9475, 358-9476, AND 358-9477 TANK BREATHERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EQUALIZER BAR CENTER PIN ON CERTAIN D7E TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EQUALIZER BAR CENTER PIN ON CERTAIN D7E TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING CUSHION DOZER TRUNNION SUPPORTS ON CERTAIN D10T TRACK TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING CUSHION DOZER TRUNNION SUPPORTS ON CERTAIN D10T TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND, IF NEEDED, INSTALLING A FAN WARNING FILM ON CERTAIN 938H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND, IF NEEDED, INSTALLING A FAN WARNING FILM ON CERTAIN 938H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR CHARGING THE FRONT SUSPENSION ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR CHARGING THE FRONT SUSPENSION ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OPERATOR SUSPENSION SEAT ON CERTAIN AD30 UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OPERATOR SUSPENSION SEAT ON CERTAIN AD30 UNDERGROUND ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS AND 336E AND 349E HYDRAULIC EXCAVATORS, AND 568 FOREST PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS AND 336E AND 349E HYDRAULIC EXCAVATORS, AND 568 FOREST PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FINAL DRIVE BOLTS ON CERTAIN D6N AND D6T TRACK-TYPE TRACTORS AND PL61 PIPELAYERS PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FINAL DRIVE BOLTS ON CERTAIN D6N AND D6T TRACK-TYPE TRACTORS AND PL61 PIPELAYERS
PRODUCT IMPROVEMENT PROGRAM FOR CHARGING THE FRONT SUSPENSION ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR CHARGING THE FRONT SUSPENSION ON CERTAIN AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUO CONE SEALS ON CERTAIN AD30 UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DUO CONE SEALS ON CERTAIN AD30 UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING PILOT RELIEF VALVE ON CERTAIN WHEEL LOADERS, COMPACTORS, AND WHEEL DOZERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING PILOT RELIEF VALVE ON CERTAIN WHEEL LOADERS, COMPACTORS, AND WHEEL DOZERS