Control Manifold (Brake)
Show/hide table
| |
| Illustration 1 | g06428186 |
|
Brake control manifold with accumulators at equal pressure, service brake applied. (1) Brake Accumulator (2) Service Brake Valve (3) Brake charge valve (4) Left Service Bake (5) Right Service Brake (6) Parking brake actuator (7) Return to Tank (8) Pump (Brake) (9) Park Brake Solenoid (10) Park Brake Pressure Sensor (11) Service Brake Accumulator Pressure Sensor (12) Service Brake Accumulator Shuttle Valve | |
Hydraulic oil enters the brake charge valve (3) and flows to the accumulator shuttle valve (12). From valve (2) oil will be diverted to the accumulator (1) having the lowest oil pressure. From the accumulators (1) oil flows to service brake valve (2). When the brake pedal is depressed, brake valve (2) allows oil to flow to right service brake (5) and left service brake (4). When the brake pedal is allowed to return to normal position, the spring in service brake (4) and (5) will force oil from the brake and to tank return (7).
Caterpillar Information System:
Turbocharger Boost Pressure on Certain C4.4 Machine Engines {1052, 7432} Turbocharger Boost Pressure on Certain C4.4 Machine Engines {1052, 7432}
798 AC Off-Highway Truck Field Assembly Tire and Rim - Install
140 GC Motor Grader Systems Brake Control Valve (Service) - Check
Installation of Wheel Chock Kits on Certain 700 Series Articulated Trucks {7192} Installation of Wheel Chock Kits on Certain 700 Series Articulated Trucks {7192}
140 GC Motor Grader Systems Machine Preparation
Hydraulic Thumbs Decommissioning and Disposal
140 GC Motor Grader Systems Parking Brake - Test
798 AC Off-Highway Truck Field Assembly Air Lines (Turbocharger) - Install
140 GC Motor Grader Systems Hydraulic System
349, 352 Hydraulic Excavator Engine Supplement Diesel Exhaust Fluid Tank - Install
140 GC Motor Grader Systems Axle Toe-In (Front) - Adjust
140 GC Motor Grader Systems Disc Pack Preload for Circle Drive - Adjust
Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562} Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562}
Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051} Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051}
349, 352 Hydraulic Excavator Engine Supplement Temperature Sensor (DPF) - Remove
C18 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458} Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458}
349, 352 Hydraulic Excavator Engine Supplement Fan - Install
C18 Generator Set Engine Oil and Filter - Change
349, 352 Hydraulic Excavator Engine Supplement Fan Motor - Install
C18 Generator Set Plate Locations and Film Locations
C18 Generator Set Model View Illustrations
The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459} The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459}
140 GC Motor Grader Systems Transmission Charge Pump