Plate Locations and Film Locations
Show/hide table
| |
| Illustration 1 | g06427497 |
| (1) Location of the identification plate for the generator set | |
The generator set consists of the generator and the engine. The location of the identification plate for the generator set is shown in illustration 2.
Show/hide table
| |
| Illustration 2 | g01185411 |
|
Right Side View of Engine Only (2) Location of serial number plate | |
The Engine Serial Number Plate contains the following information:
- Engine serial number ____________________
- Engine model number ____________________
- Arrangement number ____________________
Show/hide table
| |
| Illustration 3 | g06427522 |
| (3) Location of the engine information plate | |
The Engine Information Plate contains the following information:
- Engine serial number ____________________
- Arrangement number ____________________
- Compression ratio ____________________
- Aftercooler temperature ____________________
- Power ____________________
- Full load RPM ____________________
Generator Identification Plate
Show/hide table
| |
| Illustration 4 | g06427292 |
| (4) Location of the generator identification plate | |
The generator identification is located on the side of the generator.
The generator identification film includes the following information:
- Serial number for the generator ____________________
- Generator model number ____________________
Caterpillar Information System:
349, 352 Hydraulic Excavator Engine Supplement Fan Motor - Install
C18 Generator Set Engine Oil and Filter - Change
349, 352 Hydraulic Excavator Engine Supplement Fan - Install
Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458} Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458}
C18 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
349, 352 Hydraulic Excavator Engine Supplement Temperature Sensor (DPF) - Remove
Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051} Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051}
Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562} Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562}
140 GC Motor Grader Systems Control Manifold (Brake)
Turbocharger Boost Pressure on Certain C4.4 Machine Engines {1052, 7432} Turbocharger Boost Pressure on Certain C4.4 Machine Engines {1052, 7432}
798 AC Off-Highway Truck Field Assembly Tire and Rim - Install
140 GC Motor Grader Systems Brake Control Valve (Service) - Check
C18 Generator Set Model View Illustrations
The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459} The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459}
140 GC Motor Grader Systems Transmission Charge Pump
New Machine Software and EC520 Controller Monitor Software Is Now Available for Certain Excavators {7490, 7601, 7610, 7620} New Machine Software and EC520 Controller Monitor Software Is Now Available for Certain Excavators {7490, 7601, 7610, 7620}
140 GC Motor Grader Systems Steering Control Valve
An Incorrectly Installed Clamp May Result in Coolant Leakage on Certain Backhoe Loaders and Compact Wheel Loaders {1380} An Incorrectly Installed Clamp May Result in Coolant Leakage on Certain Backhoe Loaders and Compact Wheel Loaders {1380}
140 GC Motor Grader Systems Electronic Control (Steering System)
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395} Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Oil leaks in Past Lower Rotor Seal on Certain TRS10, TRS14, and TRS18 Tilt Rotators {6129} Oil leaks in Past Lower Rotor Seal on Certain TRS10, TRS14, and TRS18 Tilt Rotators {6129}
336D2 and 340D2 Excavators Specifications
New Torque Procedure for Track Bolt Tightening Is Now Used on Certain 374F, and MD6540C Excavators, Mobile Hydraulic Power Units, OEM Excavator Based Specialty Solutions, and Rotary Drills {4170} New Torque Procedure for Track Bolt Tightening Is Now Used on Certain 374F, and MD6540C Excavators, Mobile Hydraulic Power Units, OEM Excavator Based Specialty Solutions, and Rotary Drills {4170}
140 GC Motor Grader Systems Tandem - Check