Transmission Charge Pump
Show/hide table
| |
| Illustration 1 | g06428124 |
|
Transmission charge pump (1) Transmission (2) Transmission charge pump | |
Transmission charge pump (2) is a positive displacement type pump. The transmission charge pump is located inside transmission (1). The charge pump is connected and driven from the transmission power take off shaft. Transmission charge pump (2) draws power train oil from the transmission case in order to supply oil to the transmission for operation and lubrication.
Caterpillar Information System:
The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459} The Planetary Gear and Pinion of Swing Drive Group May Fail on Certain M314F, M315D2, and M317D2 Wheeled Excavators {5459}
C18 Generator Set Model View Illustrations
C18 Generator Set Plate Locations and Film Locations
349, 352 Hydraulic Excavator Engine Supplement Fan Motor - Install
C18 Generator Set Engine Oil and Filter - Change
349, 352 Hydraulic Excavator Engine Supplement Fan - Install
Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458} Boom, Stick, Bucket, and Blade Hydraulic Cylinders May Leak on Certain 303.5E2, 304E2, and 304.5E2 Mini Hydraulic Excavators {5113, 5456, 5457, 5458}
C18 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
349, 352 Hydraulic Excavator Engine Supplement Temperature Sensor (DPF) - Remove
Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051} Verify the Swing Relief Pressure When Replacing the Swing Motor on Certain 301.4C and 301.7D CR Mini Hydraulic Excavators {5058, 7051}
Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562} Blade Cylinder Check Valve May Fail on Certain 300.9D Mini Hydraulic Excavators {5362, 7562}
140 GC Motor Grader Systems Control Manifold (Brake)
New Machine Software and EC520 Controller Monitor Software Is Now Available for Certain Excavators {7490, 7601, 7610, 7620} New Machine Software and EC520 Controller Monitor Software Is Now Available for Certain Excavators {7490, 7601, 7610, 7620}
140 GC Motor Grader Systems Steering Control Valve
An Incorrectly Installed Clamp May Result in Coolant Leakage on Certain Backhoe Loaders and Compact Wheel Loaders {1380} An Incorrectly Installed Clamp May Result in Coolant Leakage on Certain Backhoe Loaders and Compact Wheel Loaders {1380}
140 GC Motor Grader Systems Electronic Control (Steering System)
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395} Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Oil leaks in Past Lower Rotor Seal on Certain TRS10, TRS14, and TRS18 Tilt Rotators {6129} Oil leaks in Past Lower Rotor Seal on Certain TRS10, TRS14, and TRS18 Tilt Rotators {6129}
336D2 and 340D2 Excavators Specifications
New Torque Procedure for Track Bolt Tightening Is Now Used on Certain 374F, and MD6540C Excavators, Mobile Hydraulic Power Units, OEM Excavator Based Specialty Solutions, and Rotary Drills {4170} New Torque Procedure for Track Bolt Tightening Is Now Used on Certain 374F, and MD6540C Excavators, Mobile Hydraulic Power Units, OEM Excavator Based Specialty Solutions, and Rotary Drills {4170}
140 GC Motor Grader Systems Tandem - Check
Improved Track Bolts Are Now Used on Certain 390F Excavators and Mobile Hydraulic Power Units {4170} Improved Track Bolts Are Now Used on Certain 390F Excavators and Mobile Hydraulic Power Units {4170}
Flexxaire Fan Foreword
P16, P20, P25, P28, P40 and P60 Pulverizer Foreword