Fuel Filter Base - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position the fuel filter base on the mounting bracket. Install bolts.
- Connect the tube assemblies to the fuel filter base.
- Install the fuel filter. Refer to the Operation and Maintenance Manual, "Fuel System Secondary Filter - Replace" topic for more information.
- Prime the fuel system. Refer to the Operation and Maintenance Manual, "Fuel System - Prime" topic for more information.
Caterpillar Information System:
3126E On-highway Engine Fuel Filter Base - Remove
3500 Industrial Engines Pressure Switch
G3500 Engines Pressure Switch
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor - Test - Measurement of Case Drain Oil
C7 Petroleum Engines Cooling System
3618 Engine Contactors
3500 Generator Set Engines Governor - 3161
3126B Marine Engines E268 Unexpected Engine Shutdown
G3612 and G3616 Engines Aftercooler - Install
3500 Generator Set Engines Temperature Switch
3500 Industrial Engines Temperature Switch
3500 Industrial Engines Temperature Switch
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Relief Valve (Crossover) - Test and Adjust
3500 Industrial Engines Pressure Switch - Prelube
3126E On-highway Engine Unit Injector - Remove
3500 Industrial Engines Pressure Switch
3500 Industrial Engines Pressure Switch
CPT372 Truck Mounted Pumper Product Description
3618 Engine Crankcase Pressure Contactor - Test
3618 Engine Transducers
3126E On-highway Engine Unit Injector - Install
37-MT, 41-MT, and 42-MT Series Starting Motors General Information
3618 Engine Engine Speed Switch
CPT372 Truck Mounted Pumper Fuel System Primary Filter - Replace