Fuel Filter Base - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench As     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Install caps or plugs on all openings in order to prevent system contamination.
- Use Tool (A) and remove the fuel filter.
- Disconnect tube assemblies from the fuel filter base.
- Remove bolts that hold the fuel filter base to the mounting bracket. Remove the fuel filter base.
Caterpillar Information System:
3500 Industrial Engines Pressure Switch
G3500 Engines Pressure Switch
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor - Test - Measurement of Case Drain Oil
C7 Petroleum Engines Cooling System
3618 Engine Contactors
3500 Generator Set Engines Governor - 3161
3126B Marine Engines E268 Unexpected Engine Shutdown
G3612 and G3616 Engines Aftercooler - Install
3500 Generator Set Engines Temperature Switch
3500 Industrial Engines Temperature Switch
3500 Industrial Engines Temperature Switch
3500 Generator Set Engines Temperature Switch
3126E On-highway Engine Fuel Filter Base - Install
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Relief Valve (Crossover) - Test and Adjust
3500 Industrial Engines Pressure Switch - Prelube
3126E On-highway Engine Unit Injector - Remove
3500 Industrial Engines Pressure Switch
3500 Industrial Engines Pressure Switch
CPT372 Truck Mounted Pumper Product Description
3618 Engine Crankcase Pressure Contactor - Test
3618 Engine Transducers
3126E On-highway Engine Unit Injector - Install
37-MT, 41-MT, and 42-MT Series Starting Motors General Information
3618 Engine Engine Speed Switch