Water Pump - Test
Show/hide table
| Required Tools | ||
| Part Number | Part Name | Quantity |
| 6V-7775 | Air Pressure Gauge | 1 |
Show/hide table
 | |
| Illustration 1 | g00865085 |
Typical example (1) Port (2) Coolant temperature sensor | |
Show/hide table
 |
Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts. When working on an engine that is running, avoid contact with hot parts and rotating parts. |
 |
Perform the following procedure in order to determine if the water pump is operating correctly:
- Remove the plug from port (1).
- Install the 6V-7775 Air Pressure Gauge in port (1) .
- Start the engine. Run the engine until the coolant is at operating temperature.
- Note the water pump pressure. The water pump pressure should be 100 to 125 kPa (15 to 18 psi).
Caterpillar Information System:
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0006 FMI 11 Cylinder #6 Injector fault
3126E On-highway Engine Injector Solenoid Circuit - Test
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Oil Makeup (Travel System)
3126B and 3126E On-highway Engines Engine Speed/Timing Sensor Circuit - Test
3126E On-highway Engine Customer Specified Parameters Worksheet
C7 and C9 On-Highway Engines Vehicle Speed Circuit - Calibrate
3126E On-highway Engine Warning Lamp Circuit - Test
C7 and C9 On-Highway Engines Starting Aid Output Circuit - Test
3408E and 3412E Industrial Engines Electrical Power Supply Circuit - Test
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Counterbalance Valve
C7 and C9 On-Highway Engines Wait To Start Lamp Circuit - Test
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Final Drive
3500 Generator Set Engines Temperature Switch
3500 Generator Set Engines Temperature Switch
3500 Industrial Engines Temperature Switch
3500 Industrial Engines Temperature Switch
3500 Generator Set Engines Temperature Switch
G3612 and G3616 Engines Aftercooler - Install
3126B Marine Engines E268 Unexpected Engine Shutdown
3500 Generator Set Engines Governor - 3161
3618 Engine Contactors
C7 Petroleum Engines Cooling System
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Travel Motor - Test - Measurement of Case Drain Oil