Track Carrier Roller - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
(A)     | 8T-5255     | Hydraulic Jack     | 1     |
- Start the engine. Park the machine on a hard, level surface. Shut off the engine.
- Release the tension on the track.
Show/hide table
Personal injury or death can result from grease and oil coming out of the relief valve. Grease and oil are under high pressure coming out of the relief valve and can penetrate the body. Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track. |
Show/hide table
Illustration 1 | g00489342 |
- Loosen relief valve (1) by one turn only. If the track does not loosen after opening the relief valve, move the machine forward and backward until the tension is released.
- Loosen bolt (2) that holds track carrier roller (3) to the mounting bracket on the undercarriage.
Show/hide table
Illustration 2 | g00693935 |
- Put wood blocks and Tooling (A) under the track assembly, as shown.
Show/hide table
Illustration 3 | g00489356 |
- Use Tooling (A) in order to lift the track assembly off the track carrier roller.
- Remove track carrier roller (3) .
- For Type "A" excavators, the weight of the track carrier roller is approximately 23 kg (51 lb).
- For Type "B" excavators, the weight of the track carrier roller is approximately 18 kg (40 lb).
Caterpillar Information System:
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Maintenance Interval Schedule
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Final Drive Oil Level - Check
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Carrier Roller - Assemble
797F Off-Highway Truck Steering System Piston Pump (Steering) - Adjust
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Final Drive Oil - Change
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Refill Capacities
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Engine Sensor Open/Short Test
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Final Drive Ring Gear Removal
3500 Generator Set Engines Auxiliary Drive Housing
CIPI UNDERCARRIAGE Arrangements: 3Q-6662; 6Z-7861, 7885, 7947, 7957, 7999; 9Q-5044, 5065, 5082, 5090, 5093, 5115, 5118, 5126, 5135, 5141, 5168, 5175, 5206, 5255, 5259, 5268, 5412, 5436, 5464, 5514, 5617, 5618, 5716, 5741, 5742, 5758, 5826, 5831, 5846 Final Drive Sun Gear Removal
3408E and 3412E Industrial Engines Pressure Sensor (Auxiliary)
3408E and 3412E Industrial Engines CAN Data Link Circuit - Test
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Carrier Roller - Disassemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Carrier Roller - Install
C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151} C-10, C-12, 3176C, and 3196 Bolts for the Front Housing{1151}
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Roller - Remove
3500 Locomotive Engines Engine Design
3500 Locomotive Engines Engine Design
385B Excavator Machine System Specifications Travel Counterbalance Valve
3500 Industrial Engines Engine Design
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Roller - Disassemble
3408E and 3412E Industrial Engines Flywheel
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Roller - Assemble
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Track Roller - Install