Cab - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 439-3940 | Bracket As | 4 |
Start By:
Remove the storage box and covers.
- Remove guard (2) and floor mat (1).
Show/hide table
Illustration 2 g06027916 - Remove cover (3) and duct (4).
Show/hide table
Illustration 3 g06027917 - Remove cover (5).
Show/hide table
Illustration 4 g01208274 - Remove bolts (6).
Show/hide table
Illustration 5 g01208275 - Disconnect harness assembly (8). Remove duct (7).
Show/hide table
Illustration 6 g06027918 - Disconnect harness assemblies (9) and (10).
Show/hide table
Illustration 7 g01208281 - Disconnect harness assemblies (11), (12), (13), (14), and (16). Remove duct (15).
Show/hide table
Illustration 8 g06027919 - Disconnect hoses (17).
Show/hide table
Illustration 9 g06027925 - Remove electronic control module (18) and harness assembly (19).
- Remove breaker panel (20) and washer fluid mounting bracket (21).
Show/hide table
Illustration 10 g03878979 Show/hide tableIllustration 11 g06042273 - Attach Tooling (A) and a suitable lifting device to cab (22). The weight of cab (22) is approximately
500 kg (1103 lb) . Remove two bolts (23) and cab (22).
Show/hide table
Illustration 1 | g01208263 |
- Install cab (22) in the reverse order of removal.
- Tighten bolts (23) to a torque or
125 ± 20 N·m (92 ± 15 lb ft) .
- Tighten bolts (23) to a torque or
Caterpillar Information System:
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Evaporator Coil - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Offset)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
336D 2L and 340D 2L Excavators Machine Systems Fuel Tank - Remove and Install
New Engine Software is Available for Certain C7.1 Machine Engines {7610, 7620} New Engine Software is Available for Certain C7.1 Machine Engines {7610, 7620}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
352F Mobile Hydraulic Power Unit (MHPU) Machine System Main Hydraulic System
336D 2L and 340D 2L Excavators Machine Systems Hydraulic Lockout Control - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Window Wiper Motor - Remove and Install - Lower
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
349F and 352F Excavators Joystick Controls - Cat Grade With Assist System
314F and 315F Excavators Machine System Specifications Control Valve and Mounting
314F and 315F Excavators Machine System Specifications Control Valve (Auxiliary)
An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051} An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051}