Control Valve and Mounting
Show/hide table
| |
| Illustration 1 | g06357803 |
Show/hide table
| |
| Illustration 2 | g06357817 |
|
View of area A | |
Show/hide table
| Item | Qty | Part Number | Specification Description |
|---|---|---|---|
| 1 | 3 | 5C-9553 Bolt | Torque to |
| 2 | 2 | 7X-2537 Bolt | Torque to |
| 3 | 1 | 6V-8187 Nut | Torque to |
Show/hide table
| |
| Illustration 3 | g06357834 |
|
View of area B | |
Show/hide table
| Item | Qty | Part Number | Specification Description |
|---|---|---|---|
| 4 | 1 | 6V-0253 Insert | Final Installation torque is |
| 5 | 3 | 9S-1354 Nut | Final Installation torque is |
| 6 | - | - | During final assembly, apply Locatite 243 on handle screw. |
| 7 | 1 | 454-9943 Nut | Torque to |
Caterpillar Information System:
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Offset)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Conveyor System
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Lines
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Machine Electronic Control Module Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Installation Master Guide for the 503-4975 Auxiliary Control Ar on Certain Hydraulic Excavators {5051} Installation Master Guide for the 503-4975 Auxiliary Control Ar on Certain Hydraulic Excavators {5051}
Installation of the 255-2082 Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059} Installation of the 255-2082 Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059}
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Evaporator Coil - Remove and Install
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Cab - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Fuel Tank - Remove and Install
New Engine Software is Available for Certain C7.1 Machine Engines {7610, 7620} New Engine Software is Available for Certain C7.1 Machine Engines {7610, 7620}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install