An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
- Excavator
- 312F (S/N: FKE1-UP; KMK1-UP)
- 313F (S/N: GJD1-UP; HDK1-UP)
Reference: Special Instruction, REHS8108, "Installation Procedure to Retrofit a 464-1916 Cab Lighting Upgrade Kit on Certain 312F and 313F Excavators"
A Special Instruction is available to provide the installation procedure to retrofit a 464-1916 Cab Lighting Upgrade Kit on the machines listed above.
The Special Instruction can be found on the Caterpillar Service Information System (SIS) and through the normal literature distribution system at your local Cat dealer.
Caterpillar Information System:
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
316F Excavator Machine Systems Electronic Control (Travel System)
316F Excavator Machine Systems Electronic Control (Swing System)
New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620} New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
336D2 and 340D2 Excavators Machine System Suction Fan
312F and 313F Excavator Machine Systems Electronic Control (Main Control Valve)
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Rear Mount - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Front Mount - Remove and Install
New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513} New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Mounting Bracket
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 06
PM310, PM312 and PM313 Cold Planer Machine Systems Check Valve
307E2 Mini Hydraulic Excavator Machine Systems Seat - Assemble
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Linkage - Remove and Install