New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
- Excavator
- 314E CR (S/N: GMD1-UP; ECN1-UP)
- 314E LCR (S/N: DKD1-UP; ZJT1-UP; YCW1-UP)
New machine software is available for the machines that are listed above. The new software improves E-fence parameters to allow setting the bucket width. The new software is listed in Table 1.
Show/hide table
| Machine Prefix | New Part Number | Part Name | Former Part Number |
|---|---|---|---|
| S/N:YCW, ; S/N:ZJT, ; S/N:DKD | 495-9754 | Machine Software Gp | 476-3710 |
| S/N:ECN | 495-9755 | Machine Software Gp | 490-1072 |
| S/N:GMD | 495-9756 | Machine Software Gp | 476-3712 |
Note: Go to SIS Web to make sure that the new Flash File part number is still the latest Flash File part number. A newer Flash File part number may be available. SIS Web only displays the latest available flash file. The new software is available in the form of a flash file through Caterpillar Service Information System (SIS).
Caterpillar Information System:
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
336D2 and 340D2 Excavators Machine System Suction Fan
312F and 313F Excavator Machine Systems Electronic Control (Main Control Valve)
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Rear Mount - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Front Mount - Remove and Install
New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513} New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513}
Caterpillar Machine Fluids Recommendations Reference Material
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-8
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-4
320E and 323E Excavators Machine Electronic Control System MID 299, 1140-5
316F Excavator Machine Systems Electronic Control (Swing System)
316F Excavator Machine Systems Electronic Control (Travel System)
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Mounting Bracket
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install