Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
- Disconnect harness assembly (1) from absolute pressure sensor (2).
- Remove absolute pressure sensor (2) from the sensor manifold.
- Disconnect harness assembly (5) from differential pressure sensor (4).
- Remove bolts (3) and differential pressure sensor (4) from the sensor manifold.
Show/hide table
Illustration 2 g03738700 - Remove O-ring seal (6) from absolute pressure sensor (2). Discard O-ring seal (6).
Show/hide table
Illustration 3 g03738701 - Remove O-ring seals (7) from differential pressure sensor (4). Discard O-ring seals (7).
Show/hide table
| |
| Illustration 1 | g03738697 |
- Install absolute pressure sensor (2) and differential pressure sensor (4) in the reverse order of removal.
- Tighten bolts (3) to a torque of
22 N·m (195 lb in) . - Tighten absolute pressure sensor (2) to a torque of
10 N·m (89 lb in) .
- Tighten bolts (3) to a torque of
Caterpillar Information System:
336D2 and 340D2 Excavators Machine System Suction Fan
312F and 313F Excavator Machine Systems Electronic Control (Main Control Valve)
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Rear Mount - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Front Mount - Remove and Install
New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513} New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513}
Caterpillar Machine Fluids Recommendations Reference Material
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-8
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-4
320E and 323E Excavators Machine Electronic Control System MID 299, 1140-5
Improved Installation of the Hammer Return Filter is Now Used on Certain 312E Excavators {3004, 4295, 431F, 5068, 5091, 5092} Improved Installation of the Hammer Return Filter is Now Used on Certain 312E Excavators {3004, 4295, 431F, 5068, 5091, 5092}
An Improved Hose Assembly for Hammer Lines Group are Now Used on Certain Machines {5057} An Improved Hose Assembly for Hammer Lines Group are Now Used on Certain Machines {5057}
Permanent Coupling Assembly in Hose Assemblies of Automatic Lubrication Group May Fail on Certain Hammers {6333, 7540} Permanent Coupling Assembly in Hose Assemblies of Automatic Lubrication Group May Fail on Certain Hammers {6333, 7540}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade - Remove and Install
New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620} New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
316F Excavator Machine Systems Electronic Control (Swing System)
316F Excavator Machine Systems Electronic Control (Travel System)
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Mounting Bracket
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}