Blade - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 189-0412 | Clevis | 2 |
Start By:
- Remove the blade linkage.
- Position blade (1) onto suitable cribbing. Attach Tooling (A) and a suitable lifting device to remove blade (1). The weight of blade (1) is approximately
381 kg (840 lb) . - Disconnect grease hose assembly (3). Remove bolt (2) and pin (4). Repeat for the opposite side.
- Remove blade (1).
Show/hide table
Illustration 1 | g06008746 |
Show/hide table
Illustration 2 | g06008751 |
- Install blade (1) in the reverse order of removal.
- Tighten bolt (2) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) .
- Tighten bolt (2) to a torque of
Caterpillar Information System:
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
336D2 and 340D2 Excavators Machine System Suction Fan
312F and 313F Excavator Machine Systems Electronic Control (Main Control Valve)
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Rear Mount - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Engine Front Mount - Remove and Install
New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513} New Pin Retainer Plates for Front Linkages are Now Used on Certain Excavators {6513}
Caterpillar Machine Fluids Recommendations Reference Material
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-8
320E and 323E Excavators Machine Electronic Control System MID 299, 5227-4
320E and 323E Excavators Machine Electronic Control System MID 299, 1140-5
Improved Installation of the Hammer Return Filter is Now Used on Certain 312E Excavators {3004, 4295, 431F, 5068, 5091, 5092} Improved Installation of the Hammer Return Filter is Now Used on Certain 312E Excavators {3004, 4295, 431F, 5068, 5091, 5092}
New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620} New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
316F Excavator Machine Systems Electronic Control (Swing System)
316F Excavator Machine Systems Electronic Control (Travel System)
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Mounting Bracket
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03