Fuel Tank - Remove and Install
- Drain the fuel tank. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" for the correct draining procedure.
Show/hide table
Illustration 1 g06009055 - Loosen clamp (3), remove bolts (2), and channel assembly (1).
Show/hide table
Illustration 2 g06009094 - Remove bolts (5) and cover assembly (4).
Show/hide table
Illustration 3 g06009097 - Disconnect hose assemblies (6) and (7).
Show/hide table
Illustration 4 g06009128 - Disconnect harness assembly (8).
Show/hide table
Illustration 5 g06009139 Counterweight removed for photographic purposes. - Disconnect harness assemblies (9) and (10).
Show/hide table
Illustration 6 g06009175 Counterweight removed for photographic purposes. - Remove bolts (11), (12), and (13).
Show/hide table
Illustration 7 g06009189 Counterweight removed for photographic purposes. - Remove bolts (14) and (15).
Show/hide table
Illustration 8 g06009197 - Open door (16).
Show/hide table
Illustration 9 g06009202 - Remove nut (17).
Show/hide table
Illustration 10 g06009213 Counterweight removed for photographic purposes. - Remove nut (18) and strap assembly (19).
Show/hide table
Illustration 11 g06009222 - Disconnect the hose and remove elbow (20).
Show/hide table
Illustration 12 g06009298 Counterweight removed for photographic purposes. - Remove bolts (21), (23), and bracket (22).
- Use two people to remove fuel tank (24). The weight of fuel tank (24) is approximately
33 kg (73 lb) .
- Install fuel tank (24) in the reverse order of removal.
Caterpillar Information System:
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
336D2 and 340D2 Excavators Machine System Mounting Bracket
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
316F Excavator Machine Systems Electronic Control (Travel System)
316F Excavator Machine Systems Electronic Control (Swing System)
New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620} New Machine Software to Improve E-fence Parameters is Available for Certain 314E CR Excavators {7490, 7610, 7620}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 06
PM310, PM312 and PM313 Cold Planer Machine Systems Check Valve
307E2 Mini Hydraulic Excavator Machine Systems Seat - Assemble
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Linkage - Remove and Install
Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000} Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000}
316F Excavator Machine Systems Electronic Control (Machine System)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
M314F and M316F Wheeled Excavators Hydraulic System Margin Pressure - Test and Adjust
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
316F Excavator Machine Systems Electronic Control (Pilot System)