Blade Linkage - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 189-0412 | Clevis | 2 |
B | 422-5475 | Lifting Eye Assembly | 2 |
- Disconnect grease hose assembly (1). Repeat for the opposite side.
Show/hide table
Illustration 2 g06009116 - Cut cable straps (2). Disconnect grease hose assemblies (3). Remove clamp (4). Reposition the hose assemblies out of the way. Repeat for the opposite side.
Show/hide table
Illustration 3 g06009124 - Remove bolts (5). Reposition lubrication distribution valve (6).
Show/hide table
Illustration 4 g06009131 - Remove bolts (7). Reposition bracket (8).
Show/hide table
Illustration 5 g06009157 - Attach a suitable lifting device to blade cylinder (11). The weight of blade cylinder (11) is approximately
55 kg (121 lb) . Remove bolt (9) and pin assembly (10). Lower blade cylinder (11). Repeat for the opposite side.Show/hide tableIllustration 6 g06009172 - Attach Tooling (A) , Tooling (B), and a suitable lifting device to blade linkage (12). The weight of blade linkage (12) is approximately
181 kg (400 lb) .Show/hide tableIllustration 7 g06009186 - Remove bolt (13) and pin assembly (14). Repeat for the opposite side.
Show/hide table
Illustration 8 g06009198 - Raise blade linkage (12) until blade linkage (12) is level.
Show/hide table
Illustration 9 g06009212 - Remove bolt (15) and pin assembly (16). Repeat for the opposite side.
- Remove blade linkage (12).
Show/hide table
Illustration 1 | g06009105 |
- Install blade linkage (12) in the reverse order of removal.
- Tighten bolt (15) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) . - Tighten bolt (13) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) . - Tighten bolt (9) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) .
- Tighten bolt (15) to a torque of
Caterpillar Information System:
307E2 Mini Hydraulic Excavator Machine Systems Seat - Assemble
PM310, PM312 and PM313 Cold Planer Machine Systems Check Valve
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 06
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0444 - FMI 03
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
336D2 and 340D2 Excavators Machine System Mounting Bracket
336D2 and 340D2 Excavators Machine System Hydraulic Tank Mounting
336D2 and 340D2 Excavators Machine System Fuel Tank and Mounting
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434} An Installation Procedure to Retrofit Certain 312F and 313F Excavators with a Cab Lighting Upgrade Kit is Available {1429, 1434}
Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 467-4861 Front Lines Gp on Certain Hydraulic Excavators {5057}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Loaded Bucket
Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000} Custom Parts Information for 308E2 CR Mini Hydraulic Excavators {7000}
316F Excavator Machine Systems Electronic Control (Machine System)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
M314F and M316F Wheeled Excavators Hydraulic System Margin Pressure - Test and Adjust
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
316F Excavator Machine Systems Electronic Control (Pilot System)
316F Excavator Machine Systems Electronic Control (Main Pump System)
316F Excavator Machine Systems Electronic Control (Boom System)
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610} Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
336D2 and 340D2 Excavators Machine System Pump Lines