3116 Truck Engine Caterpillar


Engine Design

Usage:

3116 2BK



Illustration 1g00821000

Cylinder and valve location

(A) Exhaust valves

(B) Inlet valves

Bore ... 105.025 ± 0.025 mm (4.1348 ± 0.0010 inch)

Stroke ... 127.0 mm (5.00 inch)

Displacement ... 6.6 L (403 in3)

Number of cylinders ... 6

Cylinder arrangement ... In-line

Valves per cylinder ... 2

Engine valve lash settings

Inlet ... 0.38 mm (0.015 inch)
Exhaust ... 0.64 mm (0.025 inch)

Type of combustion ... Direct Injection

Firing Order ... 1-5-3-6-2-4

The crankshaft rotation is viewed from the flywheel end of the engine. Crankshaft rotation ... counterclockwise

Note: The front end of the engine is opposite of the flywheel end of the engine. The left side of the engine and the right side of the engine are viewed from the flywheel end of the engine. The number one cylinder is the front cylinder.

Caterpillar Information System:

3054 and 3056 Engines 520 Generator Set Control Panel Alarm Operation
2002/01/21 A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
3054 and 3056 Engines 520 Generator Set Control Panel Manual Operation
SCT673 Truck Mounted PumperPOD Plate Locations and Film Locations
G3300 Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
2001/11/01 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
3116 Truck Engines Engine Oil Pressure
2002/05/01 The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
3116 Truck Engines Turbocharger
G3408 and G3412 Engines Plate Locations and Film Locations
2001/10/01 The New Special Instruction, REHS1147, "Operating Instructions for Program Storage Device" Is Available {0709}
3512B Marine Auxiliary Engine Cold Weather Starting
2001/11/12 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
3054 and 3056 Marine Generator Sets Before Starting Engine
3116 Truck Engine General Information
3116 Truck Engine Fuel System
3116 Truck Engine Air Inlet and Exhaust System
3116 Truck Engine Lubrication System
3116 Truck Engine Cooling System
SPT343 Truck Mounted Pumper Reference Material
3116 Truck Engine Basic Engine
3116 Truck Engine Electrical System
3500B Engines for Caterpillar Built Power Modules Engine Coolant Temperature Sensor
3512B Marine Auxiliary Engine Starting the Engine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.