2001/10/01 Caterpillar


The New Special Instruction, REHS1147, "Operating Instructions for Program Storage Device" Is Available {0709}

Usage:

3616 1FN
Engines:
3606 (S/N: 8RB)
3608 (S/N: 6MC)
3612 (S/N: 9RC; 9FR; 2NZ)
3616 (S/N: 1PD; 1FN)
3618 (S/N: 2MW)

The new Special Instruction, REHS1147, "Operating Instructions for Program Storage Device" is available for the 201-7931 Module (Program Storage Device) (PSD).

The PSD is a hand-held device that can be used in order to transfer programs to a Programmable Logic Controller (PLC) or from a PLC. The PLC is a part of the Central Processing Unit (CPU). A CPU is used in the following systems:

  • Marine Monitoring System (MMS)

  • Marine Monitoring System II (MMS II)

  • Generator Monitoring System

  • 3600 Protection Systems

The new Special Instruction includes detailed information about the following subjects:

  • Compatibility

  • Specifications

  • Required Cables

  • Upload Operation

  • Download Operation

  • Troubleshooting

Paper copies of Special Instruction, REHS1147, "Operating Instructions for Program Storage Device" are available through normal channels for literature distribution. This Special Instruction is also available for electronic distribution in the Service Information System (SIS).

Caterpillar Information System:

3512B Marine Auxiliary Engine Cold Weather Starting
3512B Marine Auxiliary Engine Programmable System Parameters
2001/11/01 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
K65-12B Voltage Regulator Service Tools
3116 Truck Engines Fuel Heater and Water Separator
3054 and 3056 Engines 520 Generator Set Control Panel Automatic Operation
G3606 and G3608 Engines Gas Shutoff Valve - Inspect
3116 Truck Engines Fuel Lines
3054 and 3056 Industrial and Generator Set Engines Piston and Rings
G3612 and G3616 Engines Gas Admission Valve - Recondition
3408E and 3412E Industrial Engines Throttle Position Sensor Circuit - Test
3116 Truck Engines Lines (Air Compressor)
G3408 and G3412 Engines Plate Locations and Film Locations
3116 Truck Engines Turbocharger
2002/05/01 The Torque Has Been Increased For The Bolts That Fasten The Stub Shafts To The Engine Cylinder Block {1237}
3116 Truck Engines Engine Oil Pressure
2001/11/01 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
G3300 Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
SCT673 Truck Mounted PumperPOD Plate Locations and Film Locations
3054 and 3056 Engines 520 Generator Set Control Panel Manual Operation
2002/01/21 A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
3054 and 3056 Engines 520 Generator Set Control Panel Alarm Operation
3116 Truck Engine Engine Design
2001/11/12 Corrections to Disassembly and Assembly , "Inlet and Exhaust Valve Guides - Remove and Install" {1104}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.