Axle Housing and Flange - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
| B | 1P-0520 | Driver Gp | 1 |
| C | 452-6001 | Bearing Grease | 1 |
- Install bearing cone (14) onto knuckle (13).
Show/hide table
Illustration 2 g01026726 - Use Tooling (A) and a suitable hammer and install the bushing into knuckle (13).
Show/hide table
Illustration 3 g01029981 - Use Tooling (A) and install seal (12) into knuckle (13).
Show/hide table
Illustration 4 g01023875 - Install seal (10) onto pin assembly (11). Raise the temperature of bearing cone (9). Install bearing cone (9) onto pin assembly (11). Repeat for the other pin assembly.
Note: Use Tooling (C) after installing bearing cone (9) to pack bearing.
Show/hide table
Illustration 5 g01023874 - Use Tooling (B) and a suitable hammer and install bearing cup (8) into wheel flange (7). Install spacer (6). Use Tooling (B) and a suitable hammer and install bearing cup (5) into wheel flange (7). Install seal (4).
Show/hide table
Illustration 6 g01023873 - Install ring gear hub (2) into ring gear (3). Install retaining ring (1).
Show/hide table
| |
| Illustration 1 | g01038749 |
End By:
- Install the axle housing and the wheel flange.
Caterpillar Information System:
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Disassemble
422F2, 427F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Pilot System Pressure - Test
Procedure to Install 432-6064 Quick Coupler Lines Gp on Certain Backhoe Loaders {5057, 6129} Procedure to Install 432-6064 Quick Coupler Lines Gp on Certain Backhoe Loaders {5057, 6129}
308E Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Relief Valve (Line) - Test and Adjust - Tool Relief Valve
Quick Coupler Installation Status{7610, 7620} Quick Coupler Installation Status{7610, 7620}
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Remove
320D2 Forest Machine Machine System Specifications Control Valve
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Default Value of Work Tool Parameters
320D2 Forest Machine Machine System Specifications Cab Riser Wiring
320D2 Forest Machine Machine System Specifications Cab Riser Wiring
308E Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
2014/11/19 An Improved Welding Process for the Bucket Hinge Plate is Used on Certain 336D, 336D2, and 340D Excavators {6001}
2014/12/05 An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05 An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320D2 Forest Machine Machine System Specifications Pilot Lines
320D2 Forest Machine Machine System Specifications Relief Valve (Line)
320D2 Forest Machine Machine System Specifications Fuel Lines
568 Forest Machine Machine System Specifications Heater and Air Conditioner Mounting
320D2 Forest Machine Circuit Breakers - Reset
320D2 Forest Machine Fuses - Replace
320D2 Forest Machine Machine System Specifications Radiator and Hydraulic Oil Cooler