Axle Housing and Flange - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
| B | 1P-0520 | Driver Gp | 1 |
Start By:
- Remove the axle housing and the wheel flange.
- Remove retaining ring (1) and ring gear hub (2) from ring gear (3).
Show/hide table
Illustration 2 g01023874 - Remove seal (4) from wheel flange (7). Use Tooling (B) and a suitable hammer in order to remove bearing cup (5). Remove spacer (6). Use Tooling (B) and a suitable hammer in order to remove bearing cup (8).
Show/hide table
Illustration 3 g01023875 - Remove bearing cone (9) and seal (10) from pin assembly (11). Repeat for the other pin assembly.
Show/hide table
Illustration 4 g01023881 - Remove seal (12) from knuckle (13).
Show/hide table
Illustration 5 g01038749 - Remove bearing cone (14) from knuckle (13).
Show/hide table
Illustration 6 g01023876 - Use Tooling (A) and a suitable hammer in order to remove the bushing from knuckle (13).
Show/hide table
| |
| Illustration 1 | g01023873 |
Caterpillar Information System:
422F2, 427F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Pilot System Pressure - Test
Procedure to Install 432-6064 Quick Coupler Lines Gp on Certain Backhoe Loaders {5057, 6129} Procedure to Install 432-6064 Quick Coupler Lines Gp on Certain Backhoe Loaders {5057, 6129}
308E Mini Hydraulic Excavator Machine Systems Boom Cylinder - Remove and Install
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Relief Valve (Line) - Test and Adjust - Tool Relief Valve
Quick Coupler Installation Status{7610, 7620} Quick Coupler Installation Status{7610, 7620}
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Remove
320D2 Forest Machine Machine System Specifications Control Valve
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System System 3 Prime: Default Value of Work Tool Parameters
320D2 Forest Machine Machine System Specifications Cab Riser Wiring
320D2 Forest Machine Machine System Specifications Cab Riser Wiring
320D2 Forest Machine Machine System Specifications Boom Lighting
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Axle Housing and Flange - Assemble
308E Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
2014/11/19 An Improved Welding Process for the Bucket Hinge Plate is Used on Certain 336D, 336D2, and 340D Excavators {6001}
2014/12/05 An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05 An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
320D2, 323D2, 326D2, 329D2 and 330D2 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320D2 Forest Machine Machine System Specifications Pilot Lines
320D2 Forest Machine Machine System Specifications Relief Valve (Line)
320D2 Forest Machine Machine System Specifications Fuel Lines
568 Forest Machine Machine System Specifications Heater and Air Conditioner Mounting
320D2 Forest Machine Circuit Breakers - Reset
320D2 Forest Machine Fuses - Replace