An Improved Spill Guard Bucket is Being Used on 938H Wheel Loaders {0679, 6101}
- Wheel Loader:
- 938H (S/N: MCC1-UP)
- Work Tool:
- BUCKET (S/N: YZA1-UP)
Description of Change: An improved 364-1883 Bucket GP is now used on 938H wheel loaders. The improved bucket has reinforced the weld joint between the spill guard and the bucket. The improvement will prevent cracking and increase the durability of the spill guard.
There is a procedure available to update earlier models of the 364-1883 Bucket GP. Refer to Special Instruction, REHS8268, "Procedure to Repair Spill Guard on the 364-1883 Bucket GP for 938H Wheel Loaders " for the reinforcement instruction.
Adaptable To: The improved bucket is effective with the following bucket models:
- (S/N: YZA247-UP)
- (S/N: YZA1-246)
Show/hide table
 | |
| Illustration 1 | g03418883 |
Caterpillar Information System:
Procedure to Repair Spill Guard on the Bucket Groups for 938H Through 980K Medium Wheel Loaders {0679, 6101} Procedure to Repair Spill Guard on the Bucket Groups for 938H Through 980K Medium Wheel Loaders {0679, 6101}
311F Excavator Machine Systems Blade Hydraulic System
311F Excavator Machine Systems Blade Hydraulic System
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Lifter Group
349F and 352F Excavators Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
349F and 352F Excavators Engine Supplement Fuel Manifold - Remove and Install - Clean Emissions Manifold
349F and 352F Excavators Engine Supplement Fuel Transfer Pump - Remove and Install
349F and 352F Excavators Engine Supplement Electric Starting Motor - Remove and Install
349F and 352F Excavators Engine Supplement Alternator - Remove and Install
320D Excavators Maintenance Interval Schedule
349F and 352F Excavators Engine Supplement Nozzle Heater Harness - Remove and Install - Harness Assembly
Engine Speed Drop and Low Boost on Certain 324E and 329E Excavators{1000, 1058, 1907} Engine Speed Drop and Low Boost on Certain 324E and 329E Excavators{1000, 1058, 1907}
349F and 352F Excavators Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Fuel Transfer Pump
349F and 352F Excavators Sensor Signal (Analog, Passive) - Test
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pressure
Vibration of the Right Side Access Door During Machine Operation on Certain 336E and 336E H Excavators{7273} Vibration of the Right Side Access Door During Machine Operation on Certain 336E and 336E H Excavators{7273}
323F Excavator Specifications
323F Excavator Boom/Stick/Bucket Combinations
323F Excavator Declaration of Conformity
326F, 329F and 330F Excavators Machine Systems Load Control Valve (Boom Cylinder) - Remove and Install
349F and 352F Excavators Battery Disconnect Switch
323F Excavator Capacities (Refill)
326F, 329F and 330F Excavators Machine Systems Load Control Valve (Boom Cylinder) - Disassemble