Fan Drive
Show/hide table
Illustration 1 | g00773307 |
Typical Example |
(1) Fill the bearing cavity with 8T-1807 Bearing Lubricant.
(2) Install the seal with the lip in the specified position. The lip should be facing toward the front of the engine.
(3) Apply 4C-4030 Sealant to the threads of the bolt.
Tighten the bolt to the following torque. ... 115 ± 5 N·m (85 ± 3.7 lb ft)
Caterpillar Information System:
XQ300, XQ400 Rental Generator Sets Before Towing
C-9 Industrial Engine Flywheel
XQ300, XQ400 Rental Generator Sets Setup
Electronic Installation Guide{1000} Electronic Installation Guide{1000}
3406E Generator Set Engines Emergency Stopping
G3516B and G3520B Generator Set Engines Heat Exchanger - Install
3126B and 3126E On-highway Engines 0105-00 High Intake Manifold Air Temperature Warning (64)
3126B and 3126E On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
3126B and 3126E On-highway Engines 0190-00 Engine Overspeed Warning (35)
C-9 Industrial Engine Water Pump
G3516B and G3520B Generator Set Engines Heat Exchanger - Remove
3306B-XQ200 Rental Generator Set Engine Starting the Engine
2001/02/01 A New Service Manual Module Is Available For The Marine Monitoring System II On 3600 Marine Engines {7490}
G3516B and G3520B Generator Set Engines Heat Exchanger - Disassemble
C-9 Industrial Engine Electric Starting Motor
2012/10/24 New Turbochargers Are Used In Certain 3608 and 3616 Applications {1052}
XQ300, XQ400 Rental Generator Sets Refill Capacities
XQ300, XQ400 Rental Generator Sets Maintenance Interval Schedule
C-9 Engines for Caterpillar Built Machines Electronic Control System Components
C-9 Industrial Engine Jacket Water Heater
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Pager Configuration
C-9 Industrial Engine Rear Power Take-Off (RPTO)
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Starting with Jump Start Cables
G3516B and G3520B Generator Set Engines Exhaust Manifold - Remove