Basic Engine
Show/hide table
NOTICE |
---|
The maximum engine rpm is set and sealed by the manufacturer without the pump and may not be modified. |
- Run the engine until the engine reaches operating temperature.
Show/hide table
Illustration 1 g02702116 - Check the low idle rpm and the high idle rpm with all attachment functions in neutral.
Show/hide table
Table 1 High Idle (No Load) Low Idle 2270 ± 25 rpm 1300 ± 25 rpm
Note: Adjust the engine rpm without load.
Caterpillar Information System:
301.4C Mini Hydraulic Excavator Basic Engine
300.9D VPS Mini Hydraulic Excavator Machine Systems Coolant Temperature Switch - Test
300.9D VPS Mini Hydraulic Excavator Machine Systems Engine Oil Pressure Switch - Test
301.4C Mini Hydraulic Excavator Compression - Test
300.9D Mini Hydraulic Excavator Compression - Test
Fusion Quick Coupler Quick Coupler - Clean/Inspect
Installation Procedure for 370-8613{0679, 6502} Installation Procedure for 370-8613{0679, 6502}
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Single Secondary Fuel Filter
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold
Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057} Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057}
3516C Generator Sets Glossary
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
Wiring Harness Medium Wheel Loader Coupler Supply Groups{6700} Wiring Harness Medium Wheel Loader Coupler Supply Groups{6700}
320E and 323E Excavators Capacities (Refill)
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
Installation Procedure for the 340-2918 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059} Installation Procedure for the 340-2918 Pilot Lines Gp On Certain Hydraulic Excavators{5057, 5059}
349E HVG UHD Mobile Hydraulic Power Unit Reference Material
320E RR Excavator Machine Systems Track - Separate
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
318E Excavator Systems Pump Control (Output Flow) - Adjust
320E RR Excavator Machine Systems Track - Connect
G310B, G315B, and G320B Demolition and Sorting Grapples Maintenance Interval Schedule
G310B, G315B, and G320B Demolition and Sorting Grapples Bearings (Cylinder Ends) - Lubricate