Front Housing and Covers
Show/hide table
Illustration 1 | g02698056 |
(1) Cylinder block (2) Front housing |
Show/hide table
Illustration 2 | g02698057 |
Front view of engine (6) Cover |
Show/hide table
Specification for 299-8022 Front Housing Gp and 338-5813 Front Housing Gp | |||
Item | Qty | Part | Specification Description |
Apply blue Loctite high flex GM to the front housing sealing surfaces before assembling the front housing to the cylinder block. The front housing must be assembled and tightened to the cylinder block within 10 minutes. | |||
3 | 8 | 6V-5217 Bolt | Use bolts of M8 x 1.25 - 20 mm. |
4 | 4 | 6V-3918 Bolt | Use bolts of M8 x 1.25 - 50 mm. |
5 | 2 | 8T-0100 Bolt | Use bolts of M8 x 1.25 - 60 mm. |
7 | 1 | 145-2264 Stud | Use the stud of M8 x 1.25 - 35 mm. |
8 | 8 | 6V-5218 Bolt | Use bolts of M8 x 1.25 - 35 mm. |
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Water Separator and Fuel Filter (Primary)
C4.4 Engines for Caterpillar Built Machines Fuel Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Water Temperature Regulator
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (Exhaust Differential)
C4.4 Engines for Caterpillar Built Machines Water Pump
C9.3 Tier 4 Final Engines Flywheel Housing
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Primary Fuel Filter Base
C4.4 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
G3516 Engines Engine Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines Soot Antenna
Instructions to Update Cold Planers and Wheel Saws for Use with the 3 Lines/14 Pin Host Machines{1408, 5057, 6634, 6712} Instructions to Update Cold Planers and Wheel Saws for Use with the 3 Lines/14 Pin Host Machines{1408, 5057, 6634, 6712}
3516C Generator Sets Glossary
Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057} Installation Procedure for the 340-2917 Front Lines Gp On Certain Hydraulic Excavators{5057}
C4.4 Engines for Caterpillar Built Machines Exhaust Manifold
C4.4 Engines for Caterpillar Built Machines Fuel Filter Base - Single Secondary Fuel Filter
Installation Procedure for 370-8613{0679, 6502} Installation Procedure for 370-8613{0679, 6502}
Fusion Quick Coupler Quick Coupler - Clean/Inspect
300.9D Mini Hydraulic Excavator Compression - Test
301.4C Mini Hydraulic Excavator Compression - Test
300.9D VPS Mini Hydraulic Excavator Machine Systems Engine Oil Pressure Switch - Test
300.9D VPS Mini Hydraulic Excavator Machine Systems Coolant Temperature Switch - Test
301.4C Mini Hydraulic Excavator Basic Engine
300.9D VPS Mini Hydraulic Excavator Machine Systems Basic Engine