Exhaust Elbow - Remove and Install
Removal Procedure
- Turn disconnect switch (1) to the OFF position.
Show/hide table
 | |
| Illustration 1 | g02407117 |
- Open hood (2) .
Show/hide table
 | |
| Illustration 2 | g02430440 |
- Mark the position of the clamps for installation purposes. Remove clamp (3) .
Show/hide table
 | |
| Illustration 3 | g02476426 |
- Remove clamp (4) and exhaust elbow (5) .
Show/hide table
 | |
| Illustration 4 | g02476427 |
Installation Procedure
- Install the exhaust elbow in reverse order.
- Tighten clamp (4) to a torque of 35 ± 2 N·m (26 ± 1 lb ft).
Caterpillar Information System:
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine and Machine Warm-Up
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers General Hazard Information
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Fire Prevention and Explosion Prevention
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Burn Prevention
M325D Material Handler Machine Systems Swing Gear and Bearing - Install
C15 and C18 Petroleum Generator Sets Reference Information
C7.1 Engines For Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Alternator - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Fuel Manifold - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Nozzle Heater Harness - Remove and Install - Harness Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Assemble
300.9D and 300.9D VPS Mini Hydraulic Excavator Bucket Tips - Inspect/Replace
300.9D and 300.9D VPS Mini Hydraulic Excavator Battery Electrolyte Level - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Main Relief Valve - Check
C7.1 Engines For Caterpillar Built Machines Fuel Pump Relay Circuit - Test
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1130 - FMI 05
C4.4 Industrial Engine Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
300.9D and 300.9D VPS Mini Hydraulic Excavator Coolant System - Flush
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 05
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 03
Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620} Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620}