Swing Gear and Bearing - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7574     | 连杆支架     | 3     |
B     | 1U-8846     | 密封垫密封胶     | 1     |
C     | 157-7228     | 粘接剂     | 1     |
- 安装内防尘密封 (4) 。 使用工具 (C) 紧固内防尘密封 (4) 的端部。 安装外防尘密封 (5) 。 使用工具 (C) 紧固外防尘密封 (5) 的端部。
Show/hide table
图 1 | g01522876 |
Show/hide table
图 2 | g01522861 |
Show/hide table
图 3 | g01118837 |
- 将工具 (B) 涂覆到齿轮和轴承 (1) 的底面上。 使用工具 (A) 和适当的起吊设备,将齿轮和轴承 (1) 安置在机器上。 齿轮和轴承 (1) 的重量约为 279 kg (615 lb)。
注: 朝下部机架的左侧定位压印在齿轮和轴承 (1) 上的 "S" 或 "F"。
- 安置隔套 (2) ,然后安装螺栓 (3) 。 拧紧螺栓 (3) 至扭矩为 900 ± 100 N·m (664 ± 74 lb ft)。
- 从齿轮和轴承 (1) 上拆下工具 (A) 和适当的起吊设备。
Show/hide table
图 4 | g01118836 |
End By: 将上部机架连接至底盘。 请参阅 拆解和组装, "上部机架和底盘机架 - 连接"。
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Reference Information
C7.1 Engines For Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Alternator - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Fuel Manifold - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Nozzle Heater Harness - Remove and Install - Harness Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Relay (ARD Nozzle Heater) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Main Control Valve - Assemble
340D Excavator Boom/Stick/Bucket Combinations
340D Excavator Specifications
M320D2 Wheeled Excavator Hydraulic System Stabilizer and Blade System
Comfort Series Seat For Caterpillar Machines Optimized Seat Air Suspension with Air Compressor
M320D2 Wheeled Excavator Hydraulic System Hydraulic Tank and Filter
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Burn Prevention
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers Fire Prevention and Explosion Prevention
H35E S, H45E S, H55E S and H65E S Hydraulic Hammers General Hazard Information
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine and Machine Warm-Up
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Exhaust Elbow - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Bucket Tips - Inspect/Replace
300.9D and 300.9D VPS Mini Hydraulic Excavator Battery Electrolyte Level - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Main Relief Valve - Check
C7.1 Engines For Caterpillar Built Machines Fuel Pump Relay Circuit - Test
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1130 - FMI 05
C4.4 Industrial Engine Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow